Our first SW tank - 180 gal build

[Corbin]

Originally Posted by asmodeus

that could end up being a very expensive decision lets hope your luck hangs in there.

Ive never put foam under a single tank ive had in the last 12 years ive been in the hobby, even big ones. they usually all just sit on hard wood - never harmed anything, you guys are just paranoid.

[Lampshade]

Originally Posted by Corbin

Ive never put foam under a single tank ive had in the last 12 years ive been in the hobby, even big ones. they usually all just sit on hard wood - never harmed anything, you guys are just paranoid.

I agree, your stand would have to have some serious defects to cause problems. I've seen just as many tanks break on foam as on wood. As long as you still have the plastic trim thing around the tank still you should be fine.

[lockrookie]

i also wouldnt worry too much i dont have foam under my 5 foot 90 and it is fine. the main cause of a break is if a floor shifts due to weather change and if your stand doesnt shift properly with it it could cause a break..but a tank could break just caue of glass defect as well for no reason.

[Skimmerking]

Originally Posted by Corbin

Ive never put foam under a single tank ive had in the last 12 years ive been in the hobby, even big ones. they usually all just sit on hard wood - never harmed anything, you guys are just paranoid.

not paranoid when you get a tank with the trim the bottom is tempered. however with her tank there isnt any trim and the bottom isnt tempered.

[Ryan]

Looks good! Cant wait to see this tank at full potential!

I have sealed wooden enclosures for my snakes with Varathane Diamond Coat. Its always held up well against split water dishes so I cant see why it wouldnt work with this. Its available at home depot and comes in many different shades.

How much room in there between the side walls and the glass? Same with the rear walls and the glass?

Just wondering if there is enough room for magnets for the powerheads is all.

[reefgirl189]

Originally Posted by Ryan

Looks good! Cant wait to see this tank at full potential!

I have sealed wooden enclosures for my snakes with Varathane Diamond Coat. Its always held up well against split water dishes so I cant see why it wouldnt work with this. Its available at home depot and comes in many different shades.

How much room in there between the side walls and the glass? Same with the rear walls and the glass?

Just wondering if there is enough room for magnets for the powerheads is all.

Hey what kind of snakes do you have? I used to breed ball pythons and cornsnakes. I love snakes.

And as for the clearance behind the tank for magnets and such.. Yes, there is enough room on either side for a magnet for a Koralia or Tunze. I can't get a vortech powerhead unless I want to put it on the front pane of glass (no thanks). I also have just enough clearance to put cords behind and on the sides of the aquarium. It's very tight.

[reefgirl189]

Here's the new aquascape:

[IMG][/IMG]

And the new sump room. Not running yet as we are waiting for plumbing glue to cure after fixing one leak (Better safe than sorry):



Our one lonely clownfish:

[IMG][/IMG]

And a FTS:

[IMG][/IMG]

[lockrookie]

looking great good job

[globaldesigns]

Looks Great, but I do have a concern, maybe someone else can validate.

Originally Posted by reefgirl189

It looks like you have ABS elbows (black parts at top of photo) with PVC piping. Is this so? I do not think you can glue those 2 together successfully, as the glues for each are different. Can anyone else validate my claim, if this is the case?

[Corbin]

Originally Posted by asmodeus

not paranoid when you get a tank with the trim the bottom is tempered. however with her tank there isnt any trim and the bottom isnt tempered.

Fair enough, i didnt think about that, i guess all my tanks have been the trim and tempered