Replacing sump... Need advice and help

[Steve'o]

Don't want to do that...afraid I will do so much damage.
Was thinking I could take the front glass off the existing sump by removing the silicon, not sure how to do this?
Steve

[jagermaier]

If you plan on putting the new in the same place you will have no choice but to remove the center support to get it in anyways.

[Lampshade]

Is your stand a 2x4 construction? DIY or store bought? if it's 2x4 you could reinforce it by putting beefing up the lateral beams with a couple extra 2x4's. You may be able to do this to a store bought as well, then you should be able to remove the centre beam. IT all depends on what's on the sides for support, and also if you'll be able to get any reinforcement in there.

[HaZRaTTy]

A picture of your stand would help people give suggestions on a plan of action. Pictures do tell 1000 words.

[Doc_Polit]

Great reason to get another tank.

[Steve'o]

Originally Posted by Doc_Polit

Great reason to get another tank.

Good point, but would have to sell this one first.. as I would want it in the same place.
Would not mind a bigger tank... hmmmmm
Steve'o

Hahah and you just got that 90 gallon setup too.

[Steve'o]

Originally Posted by HaZRaTTy

A picture of your stand would help people give suggestions on a plan of action. Pictures do tell 1000 words.

I'll post some pics tonight.. that should help.
Steve'o

[Steve'o]

Originally Posted by jagermaier

If you plan on putting the new in the same place you will have no choice but to remove the center support to get it in anyways.

My new sump is not as wide so should slide right in.
Steve