LF O-Ring for RedSea 250 x -calgary

[BlueTang<3]

Originally Posted by Delphinus

A trick that skimmer and reactor DIY'ers would do when they needed a custom Oring size that wasn't readily available is to take one larger than you need, and cut it down to the size you need. You reconnect the cut ends back together with superglue. I've had to do this on a couple unions. It works surprisingly well.

Rona used to have a pretty good selection of O rings as well.

Western Pump might be another place worthy of checking out. They are down by Princess Auto in the south.

Back in the day there was actually an industrial supplier of O-rings over in the Foothills industrial area however I think they got bought out by someone else whose name I now can't remember. I'll see if I can figure it out, if I do I'll post back.

Not intending to hyjack but we also do this at work if you cant find a seal we need or if we reseal a housing without taking it right apart we will cut the seal and put it around a shaft and glue together. Works very well

[lee9]

I might be able to help you out. I am setting up a RSM 250 and will probably not be using the stock protein skimmer because the pump is gone and I don't want to purchase a new pump for it.

I'm not sure of the condition of the o-rings I have on mine but I can check this evening when I get home from work. If they are in good shape you can have them if you want.

I'll let you know tonight.

[RipCurl]

Thanks Lee9 and thanks to everyone else for your insighful suggestions.

Much appreciated.

[lee9]

RipCurl I bought my RSM 250 used so I'm not sure how tight the connections are supposed to fit. It's about a year old.

If you want my cup and adjuster O-rings to try you can have them. Just let me know.

[RipCurl]

Awesome! Thanks. It will due in the meantime.
I can pick it up anytime except this evening. Let me know when a good day/time would be. PM your info when you have time.
Much appreciated.