![]() |
|
#1
|
||||
|
||||
![]() So if you connect all the heaters to 110 V and bypass the controller, all 3 do not get warm to touch? Definitely not good to have moisture in the glass tube. Maybe they are not submersible.
I wonder if your controller is still good? |
#2
|
|||||
|
|||||
![]() ehiem.....nuff said
but ya it does seem kinda odd that three heaters arent working properly..... must be something else
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#3
|
|||||
|
|||||
![]() Strangely even with the eheims everyone says you can submerse them. 1 of my 3 has moisture in it... still operates but i don't like it. It's the gen before the current ones.
|
#4
|
||||
|
||||
![]() I have heard that as well, but don't they have a water line on them?
|
#6
|
||||
|
||||
![]() Best heater was the Ebo Jager before they were bought out. I have one that has worked perfectly for the last 12 years.
|
#7
|
|||||
|
|||||
![]() the water lines are on submersible heaters so that they can pass CSA standards......if it is labeled as a submersible heater then it can be fully submersed, despite the water line mark
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |