Grizz's 300 gal 8'er / LED Heat sink build / Opinions on LED lay out needed

The Grizz · #1 12-09-2011, 07:21 PM

Quote:

Originally Posted by lastlight

ok that's hardcore! so do you need to lay anything down as far as a paste etc to maintain ideal heat transfer between fin and plate?

No with aluminum the heat will transfer evenly on its own as it is a very soft alloy and a great for dispersing heat.

lastlight · #2 12-09-2011, 07:24 PM

Do you have plans to paint it somehow and does doing that reduce it's ability to cool in any sig way?

Thing looks awesome. What a beast!

You should make a DIY lumenarc style mh reflector with an aluminum shell with fins on the top (for me)

Dez · #3 12-09-2011, 08:33 PM

Quote:

Originally Posted by The Grizz

No with aluminum the heat will transfer evenly on its own as it is a very soft alloy and a great for dispersing heat.

Have you worked with thermal glue before? I used it on my LED build - it's designed to transfer heat, even if you screw the LED starts onto the heat sink directly, you should put some thermal glue for maximum heat transfer.

Looks great!

Nano · #4 12-09-2011, 08:40 PM

Looks Great Greg! Did you make the Heat sinks too??

Hustler · #5 12-09-2011, 08:48 PM

Looking good bro, Cant wait to see the parts all come together

I think if i go this route I would rather brush it then cover it anyways..... Always have a soft spot for brushed alum

cuz · #6 12-09-2011, 08:59 PM

Very nice!!!
I think heatsink # 16 is crooked!!

lol
teasin!!! You should be building these for Modular to market!!!

martinmcnally · #7 12-09-2011, 09:18 PM

This confirms my theory that you are actually building a new batman call sign haha

The Grizz · #8 12-09-2011, 09:39 PM

Quote:

Originally Posted by Dez

Have you worked with thermal glue before? I used it on my LED build - it's designed to transfer heat, even if you screw the LED starts onto the heat sink directly, you should put some thermal glue for maximum heat transfer.

Looks great!

I was going to go with the thermal glue but it would get cooked when I welded it all together. I think there is a product like silver solder that is very thin, heat it up & pour it in & it will seal everything together.

Quote:

Originally Posted by Hustler

Looking good bro, Cant wait to see the parts all come together

I think if i go this route I would rather brush it then cover it anyways..... Always have a soft spot for brushed alum

I was also thinking of going with brushed.

Quote:

Originally Posted by cuz

Very nice!!!
I think heatsink # 16 is crooked!!

lol
teasin!!! You should be building these for Modular to market!!!

Martin and I have been working together to build these he has been great to deal with. I think these would be to expensive to build for market compared to extruded heat sinks. I had the plate left over from a project and just had to buy the 1/8" x 1" flat bar.

The Grizz · #9 12-09-2011, 09:41 PM

Quote:

Originally Posted by nanomano

Looks Great Greg! Did you make the Heat sinks too??

yep

Quote:

Originally Posted by nanomano

I will totally pay you to make me some sexy heatsinks when I do my tank upgrade next winter! and a stand too if you are up to it!

Im down for that, always like to build things for other peoples set-ups

Nano · #10 12-09-2011, 09:46 PM

Quote:

Originally Posted by The Grizz

Im down for that, always like to build things for other peoples set-ups

Nice much obliged man! Not sure when but most like a year, So I will be in touch! I'm doing an all led build too, probably either 125-150 gallons 6 feet long not too sure what else haha, I've been watching the progress on this thread and I just get so excited, I can wait to upgrade and learn how not to be such a reef noob!