![]() |
#21
|
|||||
|
|||||
![]() i basically take a cup of vinegar, put 4 tsp of kalk powder in the vinegar, still it up, and then mix it with 4 gallons of ro/di water.
one day i'll make a kalk stirrer using one of those single rotisserie bbq things from canadian tire. for now, i just stir it a bit after i pour the vinegar+kalk mix, wait a bit then plug into the ato setup. kalk reactors are pretty expensive for what they are. i use this in combo with a 2 part reefdoser. if i had a 3 pump doser, would probably be safer than the float switch + pump method but it would also eventually put a strain on the dosing pump and tubes. for now, the aqualifter just needs cleaning.
__________________
- rev. |
#22
|
|||||
|
|||||
![]() I used kalk in the make up water only for as long as it took me to build a kalk reactor. you cannot get a high enough concentration in top off water to make it worth it in a high growth sps system.
I had a gravity top off of 110 gal resivoir in the garage that fed my calk reactor and then went into the tank via a float valve.. no pumps. well I used one pump on my kalk reactor on a timer that would cirulate the kalk in the reactor for 1 min every hour. Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#23
|
|||||
|
|||||
![]() I just picked up a third Drew's Doser from BRS. I'm going to use it for Kalk...should get that setup today. I have a tub of RowaKalk to use up.
|