![]() |
|
#1
|
|||||
|
|||||
![]() You can run multiple independent GFCIs or combination of unprotected and protected on a single circuit so unless your load is high you won't gain much with two circuits. The redundancy gained with two circuits is really only related to the actual breaker tripping which is highly unlikely and unless you have two return pumps with one on each circuit you haven't gained any additional protection anyway. You can also run 20amp instead of 15amp.
Also keep in mind anytime you modify a component related your household electrical you're technically suppose to bring that area up to code, this can be an issue with older homes. Last edited by sphelps; 11-23-2011 at 03:18 PM. |
#2
|
|||||
|
|||||
![]() Quote:
I bought the Alberta electrical codes book, but I don't get it ha ha. I have a friend who is an industrial electrician. I am hoping to gain some help form him too..
__________________
![]() My 70 Gallon build: http://www.canreef.com/vbulletin/showthread.php?t=66478 My Mandarin Paradise: http://www.canreef.com/vbulletin/showthread.php?t=72762 I wonder... does anyone care enough to read signatures if you make them really small? I would not. I would probably moan and complain, read three words and swear once or twice. But since you made it this far, please rate my builds. ![]() |
#3
|
|||||
|
|||||
![]() Quote:
Of course it doesn't necessarily mean much, I doubt you're pulling permit so you don't have to worry about an inspection, it's more if you do some other renos down the road that you do pull permits which anything you do now could come up later. |