|
|
|
|
|
#1
11-19-2011, 03:39 PM
|
|||||
|
|||||
Don't know much about your type of skimmer, but those bubbles look way too big & not enough either. I think main chamber should be almost white with finer bubbles, so definitely some tweaking of pumps/air mixture required.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build  http://www.canreef.com/vbulletin/showthread.php?t=82206
|
|
#2
11-20-2011, 12:09 AM
|
|||||
|
|||||
|
not working very good for a beckett skimmer. bubble size eh... beckets arnt as fine as needle wheels and such, but the cylinder should be pure white.
Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#3
11-20-2011, 12:59 AM
|
|||||
|
|||||
|
I'm not sure how a Beckett works...is there an air intake to adjust? That skimmer isn't working very well. Even if there is nothing to skim (which there should be something in your tank because you have rock) the chamber should be totally white with bubbles. Maybe email your pic to the manufacturer and ask them go to get it working properly. As far as breaking in, I've never had a skimmer take more than an hour to produce foam, and not more than a week to produce a cup of green/brown skimmate.
Last edited by Myka; 11-20-2011 at 01:02 AM.
|
|
#4
11-20-2011, 02:28 AM
|
|||||
|
|||||
|
well im guessing i dont have enough flow in there.... cuse i have a coralife luft pump (air compressor) air injecting it and its insane how much it blows.
I guess Ill have to do the plumbing again and get 2 big submersible pumps..... Anyone know of a decent brand?
|
|
#5
11-20-2011, 02:38 AM
|
|||||
|
|||||
|
Why don't you email the manufacturer before you go spending a bunch of money? It can do no harm. That luft pump puts a ton of air out... 2.3 cfm IIRC if you have the SL-65. Or do you have the smaller one? The SL-38 I think it is... Anyway, I wouldn't buy new pumps yet. And what happened anyway? I thought you had a big pump already?
|
|
#6
11-20-2011, 11:04 PM
|
|||||
|
|||||
|
Quote:
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
Hybrid Mode
