![]() |
#11
|
|||||
|
|||||
![]() Quote:
![]() Last edited by sphelps; 11-19-2011 at 12:36 AM. |
#12
|
|||||
|
|||||
![]() Some salinity tips from Randy Holmes-Farley: http://reefkeeping.com/issues/2006-12/rhf/index.php
Fwiw, my hydrometers are out by 0.007 and 0.008. |
#13
|
|||||
|
|||||
![]() I use DI water, sometimes even tap water and have seen little to no difference when calibrating my refractometer at the 0 level and that's with 210 TDS tap water. It is of course possible that the 'slope' of your refractometer could be off making the 0 cal inaccurate at the salinity range you like to keep your system at. It most likely boils down to each individual refractometer. All I know is my critters are happy & I've never used calibration fluid to dial in my refractometer. I didn't pay enough for the thing to warrant using lab grade calibration fluid on it. I reckon as soon as you open the calibration fluid bottle or whatever it comes in, it's no longer useful for future use. If I was going to get that precise in calibrating my instrument, I wouldn't use the fluid more than once. I'm more concerned about ensuring my water change water is as close as possible to my system water since I tend to do fewer, larger water changes. This is where I value my refractometer, whether it's off .00? points or not, as long as both readings, make up water & system water are within .002 of each other, I'm good.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() Last edited by mike31154; 11-19-2011 at 01:22 AM. |