|
|
|
|
|
#1
11-18-2011, 07:06 PM
|
|||||
|
|||||
Other than pump wear due to no servicing as discussed by email then I doubt the unit is at fault, they are pretty bullet proof
 I have given some suggestions by email, please go through these to rule out unit issue, but as said above other than lack of servicing which can lead to the unit dosing less than dialled in, i dont see any issues, but I will continue to support you via email. One last thing, pump calibration is important - make sure you have calibrated the unit recently as per instruction manual. 
|
|
#2
11-18-2011, 07:20 PM
|
||||
|
||||
|
Thx. Micheal I think the unit is fine as well. I just feel the random dosing on the auto setting doses inappropriately close to one another. I'm not saying that this is causing the precip, but could likely play a part. Like said it is probably a shitty batch of chems.
|
|
#3
11-18-2011, 08:28 PM
|
|||||
|
|||||
|
Hi
the close dosing would not effect the chemical imbalance, the GHL is used by well over 1,000 users now in North America. I would suggest two things Use manual mode as per the instruction manual I sent then you have full control over when it doses, if you want help setting this up just call me. But you have hit the nail on the head really, bad chamicals "cheap chemicals" are cheap for a reason. I do not know what you are using but we have seen some bad stuff out there of late, more so in the "DIY" home brew catagory or stuff that is supplied from that process  calcium for salt clearance is NOT reef safe.I will reply to your email also. Last edited by Aqua-Digital; 11-18-2011 at 08:37 PM.
|
Hybrid Mode
