![]() |
|
#1
|
||||
|
||||
![]() Quote:
Last edited by spawn; 11-18-2011 at 03:20 AM. |
#2
|
||||
|
||||
![]() Last winter it seemed the ph was lower. Which is why I had chosen the recipe 1 for the slight raising effect. & it worked until august from march all paras were spot on. How does the system just change Like that?
|
#3
|
|||||
|
|||||
![]() ok so lets see if I got this right. at 4ml/gal you were causing percipitation and now your down to 1.67/gal and tyour finding you Ca is dropping.
seams pretty simple.. the number you want is between 1.67 and 4. so try bump up your Ca additive a bit, say 2.0/gal reduce testing to every second day while you dial it in. once a week is how often a known stable tank can wait. I personaly don't like the home made dosing as I find the consistancy of it isn't the best, but some people like it and have good luck. Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#4
|
||||
|
||||
![]() Quote:
|
#5
|
|||||
|
|||||
![]() hmm.. personaly none cuz I don't know anyone who doses there tanks, but I suspect quite a few would have had to if we dosed.
my old tank (90 gal) had a Ca reactor which was sized for a 500 gal tank, running full out, plus I used a kalk reactor for my make up water. go back 10 years ago when people did two part by hand, there were always problems with the precip. Randys two part was a new thing back then and lots of people were having problems with getting the stuff to make it up here with out it having a bunch of garbage in it. Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#6
|
||||
|
||||
![]() I just caught my doser dosing alk 1st & then under a min later dosing ca.... it's set on the auto dosing schedule. I have no idea how to set it manually. I've never seen this happen before. WTF
|
#7
|
|||||
|
|||||
![]() Hmm..that's not good. I think it's time to email Profilux for some help.
![]() |