|
|
|
#13
11-16-2011, 01:30 AM
|
|||||
|
|||||
I have used the same stuff on both my tanks so far. You need to use the MinWax Wood Conditioner, it's an absolute must & NOT the water based stuff. Apply the conditioner, let soak in for the recommended time then wipe off excess & let dry for time stated on can. Apply the first coat lightly, allow to dry for time on can and then rub down with a fine steel wool. Apply 2nd coat, let dry & rub down again. Applet 3rd coat and your done. I let each coat dry for at least 24 hrs.
And with that procedure you will have totally water proofed your stand. Here's a couple pics of mine, made of Birch & Oak  
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build Last edited by The Grizz; 11-16-2011 at 01:39 AM. 
|
Threaded Mode
