![]() |
|
#1
|
|||||
|
|||||
![]() I have about a month to wait until I can buy a pump. I have a friend who might lend me a mp40 just to try out. I like the tunze 7095 controller but I've never seen one in person though. I would only ever want 2 pumps for my tank.
|
#2
|
|||||
|
|||||
![]() I got my hands on 2 mp40 pumps to try out. First impression was the look of the pumps they are very nice. I quickly looked through the manual 40 some pages. This pump has some nice running modes. I got them running I could hear them especially when I turned them up, they are really noisy in pulse mode. I can't run them at max speed anyways because it disturbs my sand. I turned them down and they are not so loud but definitely noticeable. I'm currently using reef crest mode.
|
#3
|
|||||
|
|||||
![]() Jason,
maybe try two mp10w es? you have the 40's dialled back, maybe two 10's would be enough? Just a thought, I know where you can get two 10's to try, you saw how quickly they made a wave in the 90. LMK
__________________
There's plenty of room for all God's creatures. Right next to the mashed potatoes. |
#4
|
|||||
|
|||||
![]() They are running little above about 80% (10th led)power. I'm really surprised how wide the flow is on these pumps. I'm going to do some research on the mp10's never even thought about them before.
|
#5
|
|||||
|
|||||
![]() |
#6
|
|||||
|
|||||
![]() I run my MP40W ES pair at about 80 to 85% as well (4 foot 77 gal), in TSM as mentioned earlier. Find this a good compromise between the right amount of flow, flow patterns & sound from the pumps. I've never seen an MP10 in action but I would think on a tank your size they will need to be set to 100% for best results. No idea how much noise an MP10 makes compared to a 40, but personally, I'd rather have 40s turned down a little than 10s running at max. If you can get your hands on a couple of MP10s to try, that's great, 'cause in the end that's the best way to see what works for you.
That's a great video there Marko, really condenses the capability of the MP10s, wireless, battery backup & flow modes.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |
#7
|
|||||
|
|||||
![]() I honestly don't understand the issues people have with the noise. I have an old non es mp40 at 100% and I can't hear it standing in front of the tank
|