vortech or tunze

bignose · #1 11-08-2011, 12:52 AM

Wes I seen your tank with the mp40s before you got the 60's and I was impressed.

I've listened to the vortechs and they do make some noise.

BlueTang<3 · #2 11-08-2011, 01:00 AM

Quote:

Originally Posted by bignose

Wes I seen your tank with the mp40s before you got the 60's and I was impressed.

I've listened to the vortechs and they do make some noise.

They are defiantly noticeable, loudest part of my tank, I actually switched back to the 40's. To me there is not much of a difference between a tunze or a korallia.

claymax · #3 11-08-2011, 02:35 AM

the fact that you can keep wires out of your tank with the vortechs weighs really huge for me. i cant stand having something in there just dangling around

viperfish · #4 11-08-2011, 04:26 AM

Having owned both I would have to say with 100% certainty, I prefer Tunze. They make for a cleaner look, can be pointed in any direction allowing for more options when aquascaping, are dead silent, they can do a wave every bit as good as a Vortech, are more controllable, and you can't beat the quality.

bignose · #5 11-08-2011, 04:48 AM

Which pump has a wider flow?

MarkoD · #6 11-08-2011, 04:49 AM

vortech has wider flow. and it creates a major under tow

http://www.youtube.com/watch?v=pyZJR5Xs4eU

viperfish · #7 11-08-2011, 05:12 AM

The 6105 now has the wide flow option which makes it closer to a Vortech flow pattern.

globaldesigns · #8 11-08-2011, 05:02 PM

About people saying Tunze's can be pointed and Vortech's can't, this is true, however I run 2 MP40's and they are able to create the undertows and currents required that lift the garbage from the bottom, behind rockwork, etc. So in my opinion, they don't need to be pointable.

For the noise, they make a slight noise in the pulse modes, this is the ramping up and down of the motor. Is it loud, I would say NO, but it is there. In Reefcrest or Lagoon mode, they are virtually silent for me.

My vote is for the Vortech's, they just have so much more power and capabilities over any other brand.

Edit: I have also used pointable wave devices (Koralia's #4 with wavemaker) and have recently removed to let the Vortech's do all the work, and can say much much better. Didn't need any pointable powerhead in my tank.

Parker · #9 11-08-2011, 05:13 PM

I run a closed loop so my opinion in this discussion is useless. However, if I had to choose one over the other I would probably go with the Vortech, and mostly for aesthetic reasons. In one of my smaller tanks I ran Maxi-Mods and I just couldn’t get used to look of them in the tank and the Tunze are even larger.

Sunee · #10 11-08-2011, 05:53 PM

I have had both and prefer the Tunze. I ran my MP40 in lagoon mode at 70% and the whine of the ramping to the higher speeds really annoyed hubby and me (aquarium in the living room).

I notice a difference in the flow too, the MP40 did not move the sand around but I am currently getting drifts with the Tunze (the max is set at 60%, random flow, sinus wave). I will have to work on the positioning and the Profilux program as I don't like having to unbury my rics and zoas.