|
|
|
|
|
#1
11-02-2011, 06:03 PM
|
|||||
|
|||||
Thanks guys, I''ve decided to buy the 23 watt phillips daylight, from home depot, that says 6500k on the bulb.
Do you think placing the light 6"-8" from the water level with the ball of algae being a few inch's under water be a good place to mount it? Do you think this is enough light in my refuge for a 29G display and 10G sump/refuge? If I were to add another 23 watt light would this help even more? the refuge area is 6" deep after the 4" of sand 12" x 12" or would heating probably become an issue? only other light is my dispaly which is a 6 bulb ati fixture with 3 fans. plus I'll be using a mag 3 return pump, 2 x mp10 vortech pumps.
__________________
Clintos:29G Cube 24"x24"x12"D,ATI 24" 6 x 24W powermodule,4 blue,2 x 10 000K ATI's, tap water, 1 mp 10, 1 nano hydor,mag 3 lift pump, approx 40lbs L.R,2" dsb,15G sump/refuge, 23watt refuge light,3" dsb,carbon reactor,filter sock,blastos,yumas,maxi mini carpet's,paly's,perc,algae blenny. "Corals,corals,corals-they are as fascinating as candle lights." PHYTO4LIFE Last edited by phyto4life; 11-02-2011 at 06:17 PM. 
|
|
#2
11-02-2011, 06:18 PM
|
||||
|
||||
|
Great fuge light but one is more than enough. I used one over a 75g sump. Grew chaeto well.
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it! Last edited by SeaHorse_Fanatic; 11-02-2011 at 06:44 PM.
|
Hybrid Mode
