Hustlers 300G Panzer Project (Up and Running)

[no_bs]

Yes, nice looking toys. Good luck with the build. And yes do get rid of that media.

Originally Posted by Myka

lots of people are using them with success.

And lots without! To expensive of a bandaid fix. IMO.

[Myka]

Originally Posted by no_bs

And lots without! To expensive of a bandaid fix. IMO.

Agreed. I have no use for biopellets...or bioballs (on the reef).

[Hustler]

Well I got the plumbing mostly done.... went to leak test the return pump side and lo and behold a pinhole leak on 2 fittings...... So Im tearing it all out tomorrow and buing all new stuff as Im stressed to poop epoxies or 2 part puttys will leak down the road for a fix.... it was either to rough a sandpaper or the glue set to soon as the 2" to 1 1/2" reducers have to go in at the same time and hope for the best situation.... Just mad now



Hope tomorrow is a better day

[lastlight]

it amazes me that anything well primed and glued can leak I've never experienced this before. good luck I imagine removing glued sections will suck a little.

[The Grizz]

I have to ask because it jumped out at me, what did you use the sand paper for?

[intarsiabox]

Originally Posted by Hustler

Well I got the plumbing mostly done.... went to leak test the return pump side and lo and behold a pinhole leak on 2 fittings...... So Im tearing it all out tomorrow and buing all new stuff as Im stressed to poop epoxies or 2 part puttys will leak down the road for a fix.... it was either to rough a sandpaper or the glue set to soon as the 2" to 1 1/2" reducers have to go in at the same time and hope for the best situation.... Just mad now


Hope tomorrow is a better day

It looks like you have some PVC to ABS fittings together, did you use a transition glue? Wrong glues could cause a leak or weak joint. I've never had to sand any plastic pipe fittings before, usually the fit is almost water tight as is and the wet glue helps slide the pieces all the way together.

[Hustler]

Hey....sorry for the late replies.... the stainless welds have been calling 14 hrs a day.....
and ontop of that..... lol in my tired rum n coke state i tried to attach my skimmer to a direct overflor pipe..... 24hrs and nothing..... cant be working right so i will have to add power pumps submersed and start from scratch there.....
No abs to PVC in this run i did it all first pics abs and top notch as best i could....problem was I was roughing with sandpaper and it worked against me..... straight cuts and double glue from here on out.......ive done a thousand joints and never had a problem.....seems its just when it counts it gives the headaches....
Any advice or imput is more than appreciated
Got the return side all up and running but the skimmer side.....tooo much pump to keep the water in the 100 gph sump.... tried running full on one solid overflow with air injector....no go..... so back to the drawing bored....

[Parker]

Originally Posted by no_bs

And lots without! To expensive of a bandaid fix. IMO.

Originally Posted by Myka

Agreed. I have no use for biopellets...or bioballs (on the reef).

Every once in awhile I tend to go on a little rant.

I'm not sure how it's "to expensive of a Band-Aid fix" and I wouldn't necessarily call them a Band-Aid appication for all users. For my tank, 300+ total water volume it costs me $80.00 - 120.00 a year to run BP's. How much would it cost me in salt per year to do a 30% weekly or bi-weekly water change to export nitrates? If you're going to do the math I use H2Ocean and a 30% change is going to be roughly 105 gallons.

BP's can be an alternative method of controlling nitrate and not just a Band-Aid solution. There are far too many people out there who feel things should only be done one way and one way only without taking the time to examine how alternative solutions are being applied. I'd ask those same people to throw out their GFO, Carbon as well as their Skimmer because you should be doing water changes and improving your husbandry.

To the people that complain Bio-Pellets crashed thier tank:

Too much Carbon = Crashed Tank
Too Much GFO = Crashed Tank
Over Skimming = Crashed Tank
The list can go on and on


Edit: I should probably edit this post as it's a little more aggressive then it should be, it was early and my head is aching from an ear infection, maybe it was the Advil...

[The Grizz]

Thanks Parker, you said what I was thinking.

[lastlight]

I agree bio-pellets are simply another media we use to facilitate the removal of something we don't want. Same as carbon, gfo etc. I don't use them but I wouldn't call them a band-aid fix.