![]() |
|
#1
|
|||||
|
|||||
![]() Regarding complete fixtures or MR16 & PAR38 lamps? I understand the AI SOL has had a significant price drop recently, so it stands to reason there will be continued downward pressure price wise with all LED items, fixtures as well as individual bulbs & discrete components such as single LEDs. Companies that don't follow the market trends will soon fall by the wayside. The big guys, such as GE, Phillips, Osram are savvy enough having been around forever, that they'll be fine. But you never know, look what happened to GM a few years ago. I'm quite surprised they've apparently bounced back they way they have.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |
#2
|
|||||
|
|||||
![]() Here's a thread on Canreef featuring a nifty LED build using PAR38 lamps. Pretty much plug & play, if one burns out or you wish to change colours etc. easy to replace. Can add more at any time to further customize. Nice looking tank from what I can see.
http://www.canreef.com/vbulletin/sho...ight=PAR38+LED
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |
#3
|
|||||
|
|||||
![]() Thanks for the info Mike. Here is a link to a build on reefcentral using PAR38's.
http://www.reefcentral.com/forums/sh...ight=par38+led In terms of cost, they seem like they would be the cheapest out there, and easiest to do. Are their any sponsors or Canadian companies that sell PAR38's for reef tanks?
__________________
240 gallon tank build: http://www.canreef.com/vbulletin/sho...d.php?t=110073 |
#4
|
|||||
|
|||||
![]() Not sure about Canadian distributers at this point, I've been somewhat lazy in researching that since I'm on the MR16 kick at the moment. All lighting providers in Canada seem to be really dragging their feet in getting decent LEDs on to store shelves. This is why I'm still holding off and ordering bits & pieces though fleabay from China. I got a LED screw in bulb at London Drugs last week on a coupon so cost ended up being fairly reasonable at under $20. It's a dimmable Phillips 8 watt 470 lumens at 2700K bulb meant for household use, so not much good for our application. But it's surely only a matter of time until reasonably priced goodies are available more suited to our purpose.
This is why I continue to wait and use my current 2x250 MH & T5HO set up. If I had more disposable income, I'd have purchased a LED fixture some time ago. The EcoTech Radion is awful tempting since I run MP40 VorTech pumps, but the price is too high at the moment and in the end, I'm not convinced that the light communicating with my pump drivers is really necessary. I could buy a hell of a lot of MR16 bulbs for the price of a Radion. Yes, the pumps are costly too, but I started with a single new one & purchased the others used.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |
#5
|
|||||
|
|||||
![]() Quote:
if you watch the market we will start getting ones that are big sellers in the US. I reciently ran into this issue with my smoker and the pucks I like. the crown royal pucks for the bradley are now discontinued (I bought the last 4 boxes they had in canuck rubber here) the reason being that it is not cost effective to make them for the canadian market alone and due to them being a by product of booze they are no longer alowed to be inported in to the US with out large tariffs so they are no longer making them. it sucks, but it is a result of our cross boarder teriffs and trade agreements. Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#6
|
|||||
|
|||||
![]() Quote:
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() |
#7
|
|||||
|
|||||
![]() Quote:
Steve
__________________
![]() Some strive to be perfect.... I just strive. |