Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 09-18-2011, 01:04 AM
Myka's Avatar
Myka Myka is offline
Moderator
 
Join Date: Mar 2004
Location: Saskatoon, SK.
Posts: 11,268
Myka will become famous soon enough
Default

Does your tank have trim on the top with a black plastic strip running across the middle of the tank? If so, one halide will make a big shadow where that strip is. If no strip, then one halide would be fine. I would either go with 2x150w or 1x250w. I think 2x250w would be too much heat to deal with on only 67 gallons. I have 2x250 over a 24" deep 90 gallon tank and there are few LPS that can handle the output...they are all off to the side in shady areas. Many of my SPS get bleached out if they are in the brightest areas too. A person doesn't have to light the crap out of the tank to get nice colors out of SPS. Water quality is more important.
__________________
~ Mindy

SPS fanatic.

Reply With Quote
  #2  
Old 09-18-2011, 02:57 PM
Wayne's Avatar
Wayne Wayne is offline
Member
 
Join Date: May 2010
Location: Edmonton
Posts: 938
Wayne is on a distinguished road
Default

Quote:
Originally Posted by Myka View Post
Does your tank have trim on the top with a black plastic strip running across the middle of the tank? If so, one halide will make a big shadow where that strip is. If no strip, then one halide would be fine. I would either go with 2x150w or 1x250w. I think 2x250w would be too much heat to deal with on only 67 gallons. I have 2x250 over a 24" deep 90 gallon tank and there are few LPS that can handle the output...they are all off to the side in shady areas. Many of my SPS get bleached out if they are in the brightest areas too. A person doesn't have to light the crap out of the tank to get nice colors out of SPS. Water quality is more important.
OOOOO good call on the center brace!
Reply With Quote
  #3  
Old 09-18-2011, 09:42 PM
HaZRaTTy's Avatar
HaZRaTTy HaZRaTTy is offline
Member
 
Join Date: Jul 2011
Location: Edmonton
Posts: 482
HaZRaTTy is on a distinguished road
Default

Quote:
Originally Posted by Myka View Post
Does your tank have trim on the top with a black plastic strip running across the middle of the tank? If so, one halide will make a big shadow where that strip is. If no strip, then one halide would be fine. I would either go with 2x150w or 1x250w. I think 2x250w would be too much heat to deal with on only 67 gallons. I have 2x250 over a 24" deep 90 gallon tank and there are few LPS that can handle the output...they are all off to the side in shady areas. Many of my SPS get bleached out if they are in the brightest areas too. A person doesn't have to light the crap out of the tank to get nice colors out of SPS. Water quality is more important.

Haha Yes my tank does have a center brace I completely over looked that thanks for the shining the "Light" in my eyes --- Ohhhhh the Irony......

I think that a 2-150MH's would be awesome. Just to find the retro kit. I could also just run one MH on one side of the Tank.. and run the T5's the length.

Thanks for ALL The replies guys!!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 09:45 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.