![]() |
|
#1
|
|||||
|
|||||
![]() I'm setting up a 50g right now, I'm going to use a MAG7 for return, so probably about 400gph after losses. I like longer dwell time in the sump.
In tank depends a lot on what you're keeping. SPS in a bare bottom tank can take 100x turn over, softies and such with sugar sand, not so much. As stuff grows, you'll find you may have to increase flow. Start with the in tank korallias, see how they work. If you're doing a dingle return, start with the 600gph. Multiple outlets, go bigger.
__________________
Brad |
#2
|
||||
|
||||
![]() Quote:
![]() I should also say I am running a mag9.5 |
#3
|
|||||
|
|||||
![]() How the heck did I type that???? sheesh. Single. Single. returns
![]()
__________________
Brad |
#4
|
|||||
|
|||||
![]() im planning on growing mainly lps, some sps and zoos
softies will be in my other tank i have 2 returns coming from the sump on either end of the tank and 2 overflows in a corner overflow |
#5
|
|||||
|
|||||
![]() With a 25g sump, I'd stay lower in return flow. For the contents, I think you'll be fine with the korallias.
__________________
Brad |
#6
|
|||||
|
|||||
![]() or just add some of these Eductor Accelerator Loc line MaxFlow
http://www.ebay.ca/itm/Eductor-Accel...item563e70ee7f Then you could use a smaller pump.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
#7
|
|||||
|
|||||
![]() Quote:
![]()
__________________
Brad |