|
|
|
|
|
#1
09-12-2011, 03:14 AM
|
|||||
|
|||||
6mm will not cut it Brad, go with the 10 mm just to be on the safe side of caution. You will not like the look of doubled up 6mm & if you go to 10mm you will not need a center brace.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build 
|
|
#3
09-12-2011, 06:29 PM
|
|||||
|
|||||
|
You can got to any glass shop for the euro brace pieces, I got some cut for my 116 gal from Lydens Glass in Red Deer.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build
|
|
#4
09-13-2011, 11:16 PM
|
|||||
|
|||||
|
Alright, I took a closer look at the tank. The sides are 9mm glass while the front, back and bottom are 12mm.
Inside measurements are 47 5/16"L and 23 1/16" width. For those that have done their own bracing, how big of a gap do you leave for your silicone bead? I am thinking of running the length of the front and back level with the panes and then putting cross braces on top of the side panes and front/back euro. Sound about right?
|
Hybrid Mode
