Reef Scaping Advice Needed

BlueTang<3 · #1 09-10-2011, 07:03 PM

Wayne

Go to sabic polymere shapes and buy a piece of 3/8 acrylic rod and use that. I drilled with a masonry 3/8 bit i got from canadian tire for like 5 bucks. Use discretion on how far to drill. Once your happy use kz speed glue to hold it together.

Myka · #2 09-10-2011, 08:22 PM

What Wes said...be prepared to spend a whole dang day doing it too. Ugh..

The Codfather · #3 09-10-2011, 10:03 PM

Quote:

Originally Posted by BlueTang<3

Wayne

Go to sabic polymere shapes and buy a piece of 3/8 acrylic rod and use that. I drilled with a masonry 3/8 bit i got from canadian tire for like 5 bucks. Use discretion on how far to drill. Once your happy use kz speed glue to hold it together.

And while your at it, invite a friend over to "give you a hand for a second" then it only takes half the time.

Mechaninano · #4 09-10-2011, 10:19 PM

Quote:

Originally Posted by The Codfather

And while your at it, invite a friend over to "give you a hand for a second" then it only takes half the time.

I didnt know you were related to my brother

BlueTang<3 · #5 09-10-2011, 11:57 PM

Quote:

Originally Posted by The Codfather

And while your at it, invite a friend over to "give you a hand for a second" then it only takes half the time.

Yes but don't add your sand half way through doing it cause it makes it hard to see the tank.

The Codfather · #6 09-11-2011, 12:36 AM

Quote:

Originally Posted by BlueTang<3

Yes but don't add your sand half way through doing it cause it makes it hard to see the tank.

Hey, lets try to keep this thread on track.
make one little mistake, and you never live it down

Parker · #7 09-11-2011, 01:04 AM

PVC and zip ties is what I used. I like the way it turned out.

jimbo222 · #8 09-11-2011, 07:10 AM

jostafew · #9 09-11-2011, 07:22 AM

I did my aquascape using zip ties and epoxy and shortly after i gave my buddy a hand with his and we used epoxy alone and it turned out awesome (wouldn't bother with zip ties myself next time). I had to do a little drilling for my zip ties and that was time consuming. If you do drill you'd be smart to use a good hammer drill with a proper masonry bit to speed the process.

I think the shape / size / texture of rock will have a lot to do with what method u use to put it together. For eg my buddy and i used reef-saver rock from bulk reef supply which lent itself really well to the epoxy as it is very porous and gives the epoxy lots to grip on to (doesn't adhere like glue, mechanical bond only). But if your rocks are relatively smooth and round then yeah, your probably best off to do a lot of drilling using the epoxy as a supplement.

Lastly, good job on saying NO to the poor old pile of rocks aquascape! Post some pics of your scape when ur done!