|
|
|
|
|
#1
08-31-2011, 03:50 AM
|
|||||
|
|||||
Well tank is full... rock and sand in. Found out that one of the stock return power heads is faulty, must been either a cut in the coating of the wire, or a crossed wire. Every time it sees current it trips the breaker. Guess I should have changed them out to mj 1200's while i had the chance. Ill grab some pics when the cloudiness calms down.
|
|
#2
09-01-2011, 03:44 PM
|
|||||
|
|||||
|
Well the cube is off and running. RO water to the top, Salt added to a 1.026 Salinity lvl, lights hung, shoes tied (I even tied them myself this time). I really like the AI Sol fixture so far, and I dont even have my Profilux back to play with it so its just a simple on and off type joy
 . The color is nice, even with all 3 colors on full (I am assuming its 100%), its nice and light and doesnt give off a ton of heat which scared me with the HQI. Speaking of heat Im going to have to figure out why my tank temp swings from 78 - 82 with every hour that passes. If that were my range throughout the day I dont think it would be all that bad, but to bounce around that range ever hour seems kind of odd. Just waiting on the Profilux and a vortech mp10 and the hardware should be good to go. Just need to figure out the ATO system after that and I should be golden. Trying to figure out a way to mount the profilux optical lvl sensor in the return section in the back, just not alot of room back there. Well enough of my yak yak here are some pics.     Sorry about the pictures... Im going to have to spend some time figuring out how to best shoot the tank due to lighting and the curved front. Oh look... a photography forum... Thanks Canreef.
|
Hybrid Mode
