![]() |
|
#1
|
|||||
|
|||||
![]() Tests ok, as in 0? Or did they carry a value?
Ah ha, I knew it would show up as pH. You have big fish in there? Some tangs maybe? How do you treat your sandbed? How deep is it? Any conchs or other stirrers/sifters? What kind of sand? You buy it new? |
#2
|
|||||
|
|||||
![]() Quote:
Ya I have 3 tangs in the system. what do you mean by how do i treat the sandbed? The sandbed is around 1" to 1 1/2" deep. I have nassarius snails & cerith snail, I also have 3 wrasse as well as 2 clown fish that keeps the sandbed stirred up. I have sugar size and yes they were purchased new. |
#3
|
|||||
|
|||||
![]() How do you treat it as in, what do you do with it? The sandbed is probably trapping more crud than you think. I vacuum mine with a gravel vac while doing waterchanges. Makes a big difference. I think your low pH is probably caused by a large bioload.
|
#4
|
|||||
|
|||||
![]() Quote:
any recommendation in helping me raise the ph without affecting the alk or ca? |
#5
|
|||||
|
|||||
![]() As the system recovers I would like to share a handful of pics of the corals that are starting to recover.
![]() ![]() ![]() ![]() ![]() ![]() |
#6
|
|||||
|
|||||
![]() ![]()
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#7
|
|||||
|
|||||
![]() how exaclty again are you maintaining your DKH?
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#8
|
|||||
|
|||||
![]() Those are recovering corals? Well now I'm depressed....
__________________
Robb |
#9
|
||||
|
||||
![]() Your photography skills are incredible! Glad to see the corals are recovering. What is the coral in the last picture! Thanks.
|
#10
|
|||||
|
|||||
![]() Quote:
![]() I bought a vacuum (I think Hagen..?) that uses a 1" pipe for the vacuum part. I bought a 36" piece of 1" pipe (it's used for undergravel filter uptakes) and cut the pipe to be just a tad shorter than how deep my water is. Looks really well. The extra length helps to get the detritus out while leaving the sand in the tank. Low pH has many causes. The most common being either high bioload or too much CO2. Do you ever open the windows in your house for fresh air? Check for an oily film on the water surface. Pretty much any skimmer works well for off-gassing CO2, but if the house has concentrations of CO2 then all the off-gassing in the world won't help. Bioload also lowers pH as fish poop is acidic, and there are also acids released when organics are broke down through the nitrogen process. Sometimes if everything is "good" simply dripping kalkwasser at night as part replacement for calcium and alkalinity dosing will keep the pH from falling so much at night which enough to keep the pH higher during the day too. |
![]() |
Tags |
aquarium, coral, peninsula, rimless, sps |
|
|