Need advice for leveling aquarium

[ScubaSteve]

I don't think you need a 3/4" shim. Use a 1/4" to 1/2" sheet as suggested and put a medium-firm foam underneath. That'll keep the flat corners flat and make up for the sloped corner. Big thing is to keep stresses even across the bottom otherwise your tank will end up like Charlie Sheen... full of crack

[phi delt reefer]

[lastlight]

Maybe this is a good excuse to just upgrade again? Look you tried and it didn't pan out. Time to move up =)

[ScubaSteve]

Originally Posted by phi delt reefer

Sorry to digress from the thread

But really, a sheet of wood and some foam should do the trick unless you want to build of that corner then sand and paint it to match.