Boomboy's Comeback Tank

[Boomboy]

doch everytime i read your name really fast i think im reading douche. lol but im sure your not. i ordered Sunlight Supply 36" 6x39W Tek Light T5 High-Output Fixture (Black) from concept aquatics. i think i will be happy with that, im planning on having an open top so i wanted a decent looking fixture.

[doch]

Originally Posted by Boomboy

doch everytime i read your name really fast i think im reading douche. lol but im sure your not. i ordered Sunlight Supply 36" 6x39W Tek Light T5 High-Output Fixture (Black) from concept aquatics. i think i will be happy with that, im planning on having an open top so i wanted a decent looking fixture.

HAHAHA! I'm sure you're not the only one! My last name is MurDOCH! I titled my tank journal 'Murdoch's 160 gal Upgrade' to shed some light.

I too picked up the 6 bulb t5 tek light... along with another 4 bulb tek for 10 in total. The 6 is good... one of the cords powers the 2 outer most bulbs... the other powers the inner 4. Put your Super blues on the outside and you're laughing!

On my old tank I always ran the combo that I mentioned... 2xnew gen, 2x super blue and 2x fiji purple... I didn't find it pink at all. I loved the colour. Like Dez said though, it's all a matter of personal preference. Worst case scenario, if you find it to be too pink, pull one and replace it with another new gen, and save the FP for your next bulb swap.

[Boomboy]

well small update.

i finished the stand, didnt want anything fancy just something simple.
this tank also only cost me 20 bucks. ( the paint cost that much)






just got to put these on the door and it should be done.







also tank update apparently with the last update the tank will be here this sunday with the rest of my goodies cant wait to fill this up with water and get those rocks in.

doch i forget which bulbs i got but i will let you know what i got and how much i like it once set up.

[lastlight]

Well I obviously dig the stand... looks great =) How is your door attached? Mine just seats in a groove and magnets (sorta) hold it in place...

[Boomboy]

as of right now it just sit there, but im putting on those magnets to hold it in place then i just press the door in slightly and it pops out more and i pull it off. simple and not complicated. just the way i like it.

i was going for the groove to hold it in place but then just said forget it and get magnets. the door itself is very light as its only 3/8 plywood and a bit of trim.

[lastlight]

I'd seal the top of the plywood as well btw...

[Boomboy]

i know i should but im kinda lazy.