![]() |
#51
|
||||
|
||||
![]() Quote:
If you do decide to remove your sand you don't have to empty the tank you can just siphon out the sand with wider bore tubing (something like 1/2"). If you keep the tubing in the sand you don't remove too much of the water. I set up a new tank a few months ago (no journal yet) and used this method to remove most of the sugar fine I started with and replace with slightly coarser sand as my MP40 was moving it around too much. It worked great. Another option to quiet your pump if you don't like the idea of the styrofoam staying in the tank is a mesh like Lifegard aquatics aquamesh filter - I used the blue stuff and it works great. I know I am going to have to clean it really well when I clean the pump but better that than the noise. |
#52
|
||||
|
||||
![]() Took all the advice that came. I put some foam on the bottom of the pump which did help, and added some dry rock to the sump(biggest result), I also added some PVC to the vomiting end of the skimmer to not have that "splash" when it comes back out-that was another great, HUGE noise control option.
Now it's focusing on clearing the tank. |
#53
|
||||
|
||||
![]() So we took care of doing the first few steps, measuring salt tonight, cleaning the filter, and installing the lights. The water is at the right temp-what's the next step once the tank clears up?
|
#54
|
|||||
|
|||||
![]() looking forward to seeing it soon.
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |
#55
|
|||||
|
|||||
![]() Once your salinity is right.......GET SOME ROCK IN THERE GIRLY!!!
![]() ![]()
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#56
|
|||||
|
|||||
![]() I've been really curious as to why you added your salt to a tank full of water. I'm sorry and apologize if you already know this, but you should never mix up your saltwater in your tank. Have you put any live rock in your tank yet? You dont need to take out your powerheads either. Just position them different. Make sure there is a it of a ripple on the surface of the water. As another member posted early, if you put some rock in your tank it will help "break up" the flow on the sandbed.
|
#57
|
||||
|
||||
![]() Red coral had some wicked pieces of live rock when I went this afternoon. Really light ones too.
|
#58
|
||||
|
||||
![]() I mixed my salt in my tank when I was setting it up. I don't think there is anything wrong doing it that way if there are no livestock still in it.
|
#59
|
||||
|
||||
![]() |
#60
|
|||||
|
|||||
![]() ![]()
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |