![]() |
|
#1
|
||||
|
||||
![]() ![]() Here is my first venture into a reef tank. Advice welcome. I am really keen on the ADA 60-P, a 17 gallon rimless low-iron tank. However they are difficult to obtain so I've started with a 5g in the meantime. This also gives me time to figure out plumbing, sumps, ATOs and all the other bits. Tank: 5 gallon glass tank Lighting: Evil Par38 14k LED bulb in an Ikea fixture Live Rock: Marco Dry Rock and misc donated pieces Substrate: CaribSea Bahamas Oolite sugar fine (10lbs) Filtration: Tom's Mini Internal Filter with filter floss and Marineland BlackDiamond carbon Circulation: Vortech MP10 wes Heater: Marineland 50w Stand: Ikea Effectiv reinforced with plywood Water: BuckEye Field Supply Premium 75 gph RO/DI The tank is cycling. Ammonia just hit zero. Last edited by syncro; 06-14-2011 at 01:22 AM. |
#2
|
||||
|
||||
![]() The stand is an IKEA office cabinet reinforced with 5/8" plywood. It is from the IKEA Effectiv line. It's pretty sturdy on its own but there was some flex when pushing down on the top. I sealed the plywood with a wood sealer and used pond liner to create a waterproof basin to catch leaks. Do you think this will hold a 17g tank with a smaller sump below?
![]() ![]() ![]() ![]() ![]() |
#3
|
|||||
|
|||||
![]() the ikea stand modified looks kewl!
|
#4
|
|||||
|
|||||
![]() that stand will now hold as big a tank as you want to put on it!
![]()
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#5
|
||||
|
||||
![]() Thanks guys. Small screws hold the pond liner against the plywood then the edge is sealed with a bead of clear silicone.
|
#6
|
|||||
|
|||||
![]() Any updates?
|