|
|
|
|
|
#2
05-08-2011, 03:13 AM
|
|||||
|
|||||
Start with the basics, bulbs, connections, grounds, conuniutity from switches to the bulbs, power at the connectors, seeing the age i would check the resistance in the wiring also could have some corrosion issues. At least it should be an easy system no ecms or anything.
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank 
|
|
#3
05-08-2011, 05:31 AM
|
||||
|
||||
|
we have determined the signals to be a switch issue so im ordering one tomorrow , and it got too dark to work on the tail light so thats tomorrows project
__________________
Back in the saddle again . running a borrowed 65G peninsula while i get my 48"x48" centre overflow cube built. 
|
|
#4
05-08-2011, 05:35 AM
|
|||||
|
|||||
|
Signal switches are usually the culprit, it was my issue on my 2000 Magna that I also have. Fairly easy fix, tail light should be simple to find if you found the signal problem this fast. Nice job Dennis
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build
|
|
#5
05-08-2011, 05:43 AM
|
||||
|
||||
|
i was the flashlight guy chris gets the credit for this one, wiring confuses the crap outa me
__________________
Back in the saddle again . running a borrowed 65G peninsula while i get my 48"x48" centre overflow cube built.
|
Hybrid Mode
