SUMP DESIGN HELP please

[phi delt reefer]

what return pump are you using

are you running any reactors off the return pump?

what is the return pump gph rating after head loss?

i would recommend an eheim 1262 or ATB flowstar 1500 given your system volume - you can throttle them back with a gate valve if the flow is too much. Go with a Bean animal overflow system - this will require three holes for the overflow and two for the return. 1" should be good if you go with the bean animal - it allows for redundancy and is dead silent. 3/4" for the return should be good but if you check the pump specs it will tell you what the exit size fitting size is - if its one inch just use an adaptor to bring it down to 3/4 so you dont have giant return nozzles in your tank.

[phi delt reefer]

concepts design is really nice. you should pm for a price on that sump - he's got good feedback from all his clients on can reef

[dave_C]

Originally Posted by phi delt reefer

concepts design is really nice. you should pm for a price on that sump - he's got good feedback from all his clients on can reef

sorry, but to much on our plates right now but we have made two changes to this setup as we played with this design. the return chamber need to be enlarge to hold a large volume of water to allow for more evaporation and number two the filter sock tray need to be reverse from the drain chamber to allow easier access to pulling out the tray