![]() |
|
#1
|
|||||
|
|||||
![]() I use it as well. Or I WILL use it. I've got a Fluval Edge set up with saltwater. I am currently using Chemipure and it holds my PH very well. Just filter floss and Chemipure. I had bought some Chemipure Elite, but it was slightly larger than the regular Chemipure and therefore wouldn't fit in my stock filter...I found a 1/2 bag size of Chemipure Elite and will put it in when it's time to change out the filters. I should mention that I've only had my tank up since Feb 1. and only softies and LPS in the tank.
|
#2
|
||||
|
||||
![]() I use it now & have from the beginning in combination with a bag purigen , my Po4 is at 0. I order it by the case from J&L change it out every 2 months. Also for the last 3.5 months I've run additional carbon for water clarity, that gets changed monthly. I don't have a sump or reactors so it strategically placed for max flow though.
|
#3
|
|||||
|
|||||
![]() any added benefits over just running GFO in a reactor? (besides ease of use obviously
![]() |
#4
|
||||
|
||||
![]() it doubles as carbon and a phosphate remover
|
#5
|
||||
|
||||
![]() I use it in any nano skimmerless setup I do...
I thnk it works great as long as you replace as often as neccessary. |
#6
|
|||||
|
|||||
![]() how do you know when to replace the chemipure?
|
#7
|
||||
|
||||
![]() keep an eye on your ammonia and phosphates...
when they're moving up, it's like due to the chemipure being depleted. |
#8
|
||||
|
||||
![]() When your water starts to look yellow or when you "feel" it needs to be done. The "Feel" is the sixth, maybe seventh, sense developed by reefers over time
![]() |