![]() |
|
#1
|
|||||
|
|||||
![]() You guys' dosing sounds really complicated.
![]() I have dosers that dose 3x a day each, and I test once a week. Manually dose once a week if needed after testing, and if I have to manually dose two weeks in a row I will increase the doser by a few minutes. If something is too high I will unplug that doser to skip a dose or two. Before I got dosers I would manually dose calcium in the morning and alkalinity at night using equal parts. Once a week I would test, and add whatever was needed to balance out. If something was too high I would skip dosing that one for the next day or two. Last edited by Myka; 04-20-2011 at 06:03 PM. |
#2
|
|||||
|
|||||
![]() Quote:
I'm not following you Myka. Why is ours complicated? I basically do exactly the same as you. Dosers on timers and check levels once a week. Top up manually if required.
__________________
225g reef |
#3
|
|||||
|
|||||
![]() Quote:
![]() |
#4
|
|||||
|
|||||
![]() seems setting up is pretty much like the reactor, get the Ca and Alk where you want them use either system just to maintain the levels. Little adjusting at the start to match consumption rate, it's just a little tweaking to keep up with changes in growth.
__________________
my tank |
#5
|
|||||
|
|||||
![]() Do the same as everyone else. I was usually finding due to growth that things dipped a bit between my testing so now if my numbers are ok I actually bump both alk and calcium up a little to account for growth increases between then and the next test.
|
#6
|
||||
|
||||
![]() I'm running the GHL & happy with it, but surprised how once introduced, the corals demand very quickly increased to the point where I'm dosing 2 ml per gal.of brs recipe 1 in about 55 gal of water just to maintain 120 ml Ca & 110 ml alk are added daily. The amounts are different because I switch from salt to salt weekly for water changes causing a higher average alk addition than Ca addition, & When I get into my big build I may look at a reactor though to see if there is even less work & if it maybe cheaper in the long run.
Last edited by spawn; 04-20-2011 at 08:26 PM. Reason: add product used |
#7
|
|||||
|
|||||
![]() ya you kinda need to be a mad scientist for a couple weeks while you get things dialed in, but then after that its just routine checking from time to time to see if all is still well......
Quote:
![]() ![]() ![]()
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 Last edited by fishytime; 04-21-2011 at 01:14 AM. |
#8
|
||||
|
||||
![]() Thanks for chiming in Doug. I was kinda wondering what a tank like yours in it's first glory was taking on a ml per gallon ratio? & by the way you wrote "Couples Weeks" kinda insinuates you my be away on an upcoming vacation.???
![]() Quote:
|
#9
|
|||||
|
|||||
![]() Quote:
![]()
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#10
|
||||
|
||||
![]() Quote:
anyways mine last about 35 days and i seem to always have about 150 ml of calcium left when the alk is empty dont know why the dosers are the same and timing the same and levels stay constant but it works
__________________
250G DD LED SPS R.I.P. 180G LED SPS 80"x36". 300G custom build Owner of Mountain Ridge Heating and Gas Class A gas fitter, HVAC |