![]() |
|
#1
|
||||
|
||||
![]() no rock, sand or live stock. only equipment down was skimmer because I was redoing the plumbing in order to fist a bigger one. also efflux line on the ca reactor was clog for sometime but, don't think that will cause much of cycling issue.
thanks
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3 |
#2
|
|||||
|
|||||
![]() remove the dying colonies and affected parts, siphon out the slimy bits if you can. the death may be triggering others to do the same. run lots of carbon and do lots of water changes. eventually it should slow down. sorry to hear of this, I had the same thing happen due to a massive decrease in temp after a tank move
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#3
|
|||||
|
|||||
![]() I recently also went through a mini crash don't but it was from a clam spawn
![]()
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |
#4
|
||||
|
||||
![]() just complete another 50% water change.
carbon is running. how often should I change them out while the tank is suffer major sps death. if I keep on loosing sps at the current rate, I won't have any left by end of week. LPS survives though... cleaner shrimps are doing ok, bandit crab is alive however it will probably run out of sps colony to live in. RBTA is alive, although it's on a major move today. Just gonna cross my finger and see what happen in the next few days. hopefully there will be a few colonies left.
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3 |
#5
|
||||
|
||||
![]() I agree with Christy. Cut your losses and frag what you can and get rid of all the dying bits. With SPS, death begets death.
|
#6
|
|||||
|
|||||
![]() Quote:
If you weren't moving water through your ca reactor, the water in the ca reactor was sitting without oxegyn and would have become anaerobic. This can lead to the production of hydrogen sulfide. If you have water sitting in pipes, you should always flush it so that it doesn't end up in the tank. With a ca reactor, the water moves through it slowly and it's possible you might not have noticed the smell. Aside from hydrogen sulfide, there are other problems that can arise from anaerobic conditions, but you would have to do some research to see whether the symptoms relate to your experience. There are some recommended solutions for this and some good documents on the web that can help you through it. I only remember a couple of things such as leaving your lights on, maximizing aeration by pointing powerheads at the surface, putting in new carbon and water changes. Hope things take a turn for the better. Good luck. |
#7
|
||||
|
||||
![]() that I have no idea, I only spotted it using iphone facetime(video call) while wife was feeding the fish. She doesn't know how long ago the line was clogged.
on the interesting side note. it appears that I have more death during the day than night.
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3 Last edited by apexifd; 04-04-2011 at 11:46 AM. |
#8
|
||||
|
||||
![]() Hmmmm... Bacterial bloom maybe. I had an issue once (and still time to time) where I get big bacteria blooms that leave films on the glass and kind of stringt, bubble things coming off the rocks (not dinos), and they seem to flourish during daylight hours. When this happens really bad I find everything looks unhappy. My theory is that the blooms drop the O2 levels in the tank (this has been scientifically proven for many bacterial blooms) and everything suffers. I think this is ultimately what caused my cantaloupe sized birdsnest to crash. Took me forever to figure it our but once I got the bloom under control everything bounced back and stopped dying.
|
#9
|
||||
|
||||
![]() I had a similar tank crash last summer. The route cause ended up being my calcium reactor that had gone offline. It caused all my parameters to go crazy to the point were i didn't understand how they were related but in truth, it was simply a chain reaction of evens caused by system adapting to the lack of balance in the calc. and alk.
I ended up losing almost everything of importance. Only lost 1 or 2 fish though which kept me going. All in all, i would suggest patience, try not to over react as hard as that is. Toss some Rowaphos, Some Carbon and and just 10gal water changes ever other day. And ride it out. |
#10
|
||||
|
||||
![]() the birds nest and green monti cap I got from you before are gone. it's actually the monti cap went first, then I was slowly losing acro and such. then last week, I started to suffer heavy loses. Looks like my elegance is on it's way out as well.
Quote:
luckily I haven't lose any fish yet. Hopefully by the time everything stabilize, I will have some corals left even though I already lost way more than half of them.
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3 |