EcoRay Led's Fixtures Now Avaliable

[BlueWorldAquatic]

INTRODUCING ECORAY 112D (Dual Cords)

56 White High Power 1 Watt LED
56 Blue Actinic High Power 1 Watt LED
700+ PAR, 24" from center
Designed for larger and deeper tanks up to 5 feet deep
All Aluminium Housing 19.6" x 11.3" x 2.4", 13.9 lbs
Light coverage to get 150+ PAR at 24": 25" x 17"


INTRODUCING ECORAY 60 BLUE

60 High Power Royal Blue 460 to 470 nm 1 Watt LED
600+ PAR, 24" from center
Designed for store/show tanks
Watch your coral glow with insane colors
Light coverage to get 150+ PAR at 24": 20" x 15"


Ecoray 60D (Dual Cords)

One cord for White LED, one cord for Blue LED
You can put the cords on different timers
Turn on the Blue LED only and watch your coral glow with intense colors
300+ PAR at 24" from center with Blue LED only turned on


Ecoray 60

Ecoray High PAR LED Light
BRIGHTER THAN METAL HALIDE
UP TO 100+ LUMENS PER WATT, UP TO 500+ PAR AT 24" FROM CENTER
SHIMMER EFFECT
DOES NOT HEAT YOUR TANK

SAVE OVER $375/YEAR ON ENERGY, BULB REPLACEMENT. CHILLER USAGE*

[sgreen]

Do you have a price on these?

[jorjef]

Call me crazy but if each LED unit equals a 250w Halide would you really need 3-6 fixtures on a 90?.. I can't imagine anyone having 6 - 250w halides on a 90 gallon tank.

• 55 gallon aquarium – 3 fixtures
• 58 or 65 gallon aquarium – 2 fixtures
• 75 or 90 gallon aquarium – 3 or 6 fixtures, depending on how much coral you plan
• 125 or 135 gallon aquarium – 8 fixtures, depending on how much coral you plan
• 180 gallon aquarium – 8 fixtures for full coverage

__________________

[Dez]

The reviews of this light fixture says that the light is really focused, so you won't get much spread. Unless you suspend it 2 feet above the water. This results in a really spotty effect if you only have 2 lights over a 48" tank. Not a lot of people will want to mount it 24" above their tank. This is cause the reflector for each led uses a 60 degree lens, making it
Really focused, resulting in the high par values.

[Skimmerking]

what about swapping the reflectors out for 120's instead of 60 or go to a 70

[Jeff000]

What is the cost on these?

Originally Posted by Dez

The reviews of this light fixture says that the light is really focused, so you won't get much spread. Unless you suspend it 2 feet above the water. This results in a really spotty effect if you only have 2 lights over a 48" tank. Not a lot of people will want to mount it 24" above their tank. This is cause the reflector for each led uses a 60 degree lens, making it
Really focused, resulting in the high par values.

The little sub note on the image in the first post says based off replacing a 250w mh with 4 of the Ecoray 60's

So 4 60's = 250w mh.
And their power savings are based off $0.25/kWh, A little more then 2.5 times what the rate in Edmonton is.


I bet replacing with 120 degree lens would not give you anywhere near the par values, they are only 1w LED's. Not to mention finding a 120 degree lens for that led might be very hard or impossible.

[BlueWorldAquatic]

Originally Posted by Dez

The reviews of this light fixture says that the light is really focused, so you won't get much spread. Unless you suspend it 2 feet above the water. This results in a really spotty effect if you only have 2 lights over a 48" tank. Not a lot of people will want to mount it 24" above their tank. This is cause the reflector for each led uses a 60 degree lens, making it
Really focused, resulting in the high par values.

Initially these lights were designed for placement up to 4' above water for commercial use.

We are actually talking to the manufacturer in changing the collimator angles for a more home user effect, the pars will be slightly reduced, but you will get better coverage. As we will be the authorize warranty depot for the Led's in Canada, we will be able to help modify them better for non-commercial use.

Then again, for a suggested retail of $349.99 for the 60d, it's nothing to sneeze at.

Ken - BWA

[eli@fijireefrock.com]

From experience with my led array.

i think for the the price this is a decent lighting module.
As for the lens at 60 degree is a bit narrow will have to be at least 18" high from the surface,if you remove the lens or replace it with a wider angle you will loose quite a bit of PAR.
At 1W each totals 112w What is the amperage drive max or what are they driven at as most companies drive the Led at only 70% of the full capability.