|
|
|
|
|
#1
03-25-2011, 03:06 PM
|
|||||
|
|||||
I thnink it would be interesting to see a pc liquid cooling concept applied to cooling LED's. Most kits are inexpensive in the grande scheme of things and allow expantion.
__________________
"120 Gallon - Fastest Build in the West" 20Gal Sump, 2x 250 PFO Metal Hallides running 2 20k XM Bulbs, 2X54 HOT5 1 KZ Coral Light 1 Fiji Purple, Euroreef RS 100 Skimmer, Quiet One 6000 Return Pump, 2X Tunze 6025, Nano Wavebox ~To Live Is To Reef~
|
|
#2
03-28-2011, 04:37 PM
|
||||
|
||||
|
Would empty aluminum soda cans work? Put the leds on an aluminum bar stock and then use some thermal glue to glue a bunch of soda cans end to end(caps removed) and have a pressurized fan blow air through the soda can tube?
|
|
#3
03-28-2011, 07:36 PM
|
|||||
|
|||||
|
check out "Steve's" LEDs. he used 1.25 square tube with 1/8th wall thickness and uses these fans on the end of the tube.
http://shop.stevesleds.com/Cooling-Fans_c11.htm they are the cooling fans from sony wega's you can get the fans cheep from him and then buy some tubing at your local metal shop. Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
Hybrid Mode
