![]() |
|
#1
|
|||||
|
|||||
![]() Taggin along for the ride. Not a bad looking light.
![]()
__________________
Es355lucille & KissMyWrasse's 140g Main Tank 55g Sump http://www.canreef.com/vbulletin/showthread.php?t=51996 ![]() |
#2
|
||||
|
||||
![]() I bought the same one only in the 24" size for my Fluval. It was reliable and ran with no problems but the bulb quality and reflectors are poor (get what you pay for). I went from a 24" Aquatic Life T5HO (96 watts total) set up to this. I don't have a par meter but the lighting looked duller than the Aquatic Life and I started to get bad algae issues shortly after with no other tank changes. If you look at the overall quality of the wiring inside it compared to a high quality fixture, you will also see it is lacking (although perfectly functional). I think if the bulbs are upgraded it is a pretty good buy, but with the stock bulbs its got pretty mediocre performance. I think I paid $169 for mine (compared to about $525-$889 for a Sunlight Supply or Giesemann) so if i factor in $80 for a top line 150w MH & 4 X 24W T5HO Giesemann for another $80, I am only at $329 and have a pretty good set-up. Those same set ups for the size you have would run about $890-$1400.
I am interested to see how yours measures up for you, I bought mine two years ago so things have possibly improved.
__________________
Fluval Osaka 41g sumpless tank, 250w MH + 130W PC , DIY HOB refugium, Tunze 9002, Koralia 2, Koralia Nano Toad Stool Colt Coral Purple Shrooms Red Shrooms Candy Cane Coral Hammer Coral Moon Coral Copper Banded Shrimp..and growing |
#3
|
||||
|
||||
![]() The design looks almost identical to the Coralife aqualight pro. Some of the cons you listed I have for a similar light that would have cost at least twice what you paid, so it's a pretty good deal. And you are correct, following the whole ballast debacle a few years back Odyssea began to find new ballast suppliers and in the end ended up with SMU Icecap ballasts (SMU = special make up... ie. no icecap badging). This is all to my understanding and I may be wrong... but as you've said you've even got the same model and serial on the ballast.
|