Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 03-19-2011, 07:05 PM
Dez's Avatar
Dez Dez is offline
Member
 
Join Date: Mar 2002
Location: Edmonton
Posts: 1,793
Dez is on a distinguished road
Default

You could also just t off your return pump and just have it trickle into the 6 footer and then run the drain to the cube drain. I have my frag tank set up like this. This way you are not adding any more flow so a larger drain is not necessary. Then just make sure you have a closed loop or lots of flow from powerheads in the 6 footer.

I have barely a trickle going into both of my frag tanks and just use Tunze's for flow in the frag tank. My frags have been doing well and growing for the past year and a half. Hope this helps.
Reply With Quote
  #2  
Old 03-19-2011, 07:10 PM
reefwars reefwars is offline
R.I.P.
 
Join Date: Apr 2010
Location: Calgary, AB
Posts: 6,186
reefwars will become famous soon enough
Default

agreed with all but if im reading right cant you just split everything anyways?? i mean tee off your return into both tanks... even up over if you have to and have your drains emptying into the same sump???? no need for a syphon tube at all???


if both tanks are drilled then why use a syphon??
__________________
........
Reply With Quote
  #3  
Old 03-19-2011, 09:37 PM
2pts 2pts is offline
Member
 
Join Date: Feb 2010
Location: Vernon, BC, Canada
Posts: 123
2pts is on a distinguished road
Default

Thanks everyone.

I'm going to keep on the look out for a good deal on a used stronger pump which will feed the 6' tank. I'll keep the weaker pump supplying the 3' tank, from the same sump.

I am now thinking to add a return line to the 3' tank which I can hide through the rear wall/back of canopy. Then change the two 1 1/2" holes to 1 herbie return and 1 emergency drain.

On the 6' tank, a 1" herbie in each corner, tee'd together just under the tank going into 1 1/2" line, then with 1 gate valve to restrict the flow. 1 emergency 1" drain in each corner, both seperately running directly to the sump.

Mike... thank you for the kind offer, but I think I'll just hold off setting it up up untill I can find a used pump.

I bought an RO unit from phitopharmer without the cartridges a few months ago. I have been just running to the RO/DI pay water station near Polson Park for my top up water, and drinking water.

As I am not adding any liverock to my system ( I have about 240lbs I am just going to be splitting between the 2 tanks), that means I am increasing my water volume of my system 125 gallons.

At $7 per 20 gallons (the price at the pay station), it would take me $42 dollars to fill the new tank. Plus about $20 / month to do water changes / top ups. So I figure I'll return my ten water bottles at $10 deposits per bottle for $100. The money I will use to get my RO unit up and running, when I'm ready could I hit you up for your help Mike? From seeing your system, you obviously know your stuff with the RO units.

Thanks, Shawn.
Reply With Quote
  #4  
Old 03-20-2011, 12:31 AM
mike31154's Avatar
mike31154 mike31154 is offline
Member
 
Join Date: Jul 2008
Location: Vernon
Posts: 2,073
mike31154 will become famous soon enough
Default

Sure thing Shawn. If you wish I'd be willing to run my RODI for you to fill up a few jugs. LMK how much you'd like and maybe bring the containers over & I'll fill them up for you.
__________________
Mike
77g sumpless SW
DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206
Reply With Quote
  #5  
Old 03-20-2011, 12:38 AM
Delphinus's Avatar
Delphinus Delphinus is offline
Member
 
Join Date: Dec 2001
Location: Calgary
Posts: 12,896
Delphinus has a spectacular aura aboutDelphinus has a spectacular aura aboutDelphinus has a spectacular aura about
Send a message via MSN to Delphinus
Default

I have seen folks run two tanks where the tops were at the same level and just connected by U-tubes. As far as flow theory goes I don't see a reason it wouldn't work.

But I wouldn't do it personally. Not just for the risk of disease as you've already pointed out but that for fish poop and surface oils you kind of want a direct line to your skimmer. Also U-tubes get air bubbles and the siphon can fail.
__________________
-- Tony
My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 11:23 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.