Need Help - Drilling 10 gallon

[sphelps]

Cut a piece of rigid foam to fully support the glass you're drilling and if possible try drilling from both sides (go 3/4 deep from one side then finish from the other side). Also make yourself a good guide to hold the bit square and in place, this can be done by simply drilling the same size hole in a 3/4" piece of plywood or something similar.

[jphong]

Thanks will get some wood tonight hopefully home depot and hook me up with a small chunk of wood with a hole in it.

[monocus]

do not press on the drill-let the weight of the drill do the work-takes more time -but better results