![]() |
|
#1
|
|||||
|
|||||
![]() Depends on what the hole is for. If it is for a closed loop just a strainer, if it is for the sump I would put an overflow so that you can maintain the water level in your tank above the hole.
__________________
210 Gallon slowly gaining population. Foxface, Naso, Coral Beauty, 2 Clowns, 2 Chromis, Orange Anthias, and Striped Goby. |
#2
|
|||||
|
|||||
![]() You could do a coast-to-coast overflow, like this:
http://www.beananimal.com/media/4054...de_500x375.jpg
__________________
-Mark 29 Gal Bowfront w/24" LED Lights. DIY HOB Sump (5.4 Gal) MP40. Orange Spotted Watchman Goby, 2 Clownfish and a few hermits. |
#3
|
||||
|
||||
![]() Ditto on the above. I assume you're using a sump, so I highly recommend and overflow of any sort. I recommend the beananimal overflow set up. YouTube it and you'll be sold.
|
#4
|
|||||
|
|||||
![]() if it is side drilled high you could just put an elbow on it and go from there.
if it is low i would go with an overflow. I would also go with doing something <herbie, bean> to reduce the noise i have a side drilled tank with overflow but there is not enough room in there to build any noise reducing contraption and it is VERY loud and gurgley. drove me so nuts i took it down a week ago. heh |