Drilled or External Overflow?

[fkshiu]

Originally Posted by bigbadbrent

This got a lot of replies, more then i could have hoped for. Thanks for the advice guys.

To get the true 'external' overflow, are they normally custom built?

Yes.

[byee]

I've got the CPR CS 102 for since I started my tank 5 years ago. I've lost count on the number of aqualift pumps!

Each time the pump fails, I have the beginnings of an indoor pool in my basement.

I was told CPR makes on of the 'best' HOB overflows......they may but the weak point is Lee's Aqualift pump! Just flooded by basement again for the 8th time. The rubber diaframs all full of salt. If a standard siphon tube can run forever with NO air bubbles, why does the CPR require a aqualift pump to pull out the air?? Inherent design problem??

$1,000,000 question, is the aqualift used to correct a design flaw in the overflow?

I'm replacing mine with a Lifereef type using good old fashion siphon tubes!!

[tinman]

+1 on the internal I have 2 one in each corner 6 x 6 each. By 16 inches high never gonna clog and a fifty gallon sump for a 100 gallon tank with a backup retun pump all wired to my apex my gf is much happier no more floods