dried cement like coraline removal hints

[The Grizz]

Originally Posted by The Grizz

Check Rona for GE SCS 1200

I was told that this silicone is aquarium safe but still have not found where to get it or if it is.

[lockrookie]

never hurts to look wheni get a chance to go to rona and home dumpo i willletyou know if i find it.

[Aquattro]

Originally Posted by The Grizz

I was told that this silicone is aquarium safe but still have not found where to get it or if it is.

It is safe, all Sea Star tanks have it. I've used it often myself.

[The Grizz]

Originally Posted by Aquattro

It is safe, all Sea Star tanks have it. I've used it often myself.

Where did you find it out there maybe it might help me to find it here.

[Big Tang]

Originally Posted by The Grizz

Where did you find it out there maybe it might help me to find it here.

Hey grizz if you need some when you come to town let me know I have some clear 1200 .

[The Grizz]

Originally Posted by Big Tang

Hey grizz if you need some when you come to town let me know I have some clear 1200 .

Looking for the black, where did you find the clear?

Sorry LR for jacking your thread

As for your issue of crystals on the bottom of the tub / tank put a couple small power heads near the bottom at each end pointed towards the bottom.

[lockrookie]

Originally Posted by The Grizz

Sorry LR for jacking your thread

As for your issue of crystals on the bottom of the tub / tank put a couple small power heads near the bottom at each end pointed towards the bottom.

no worries hijack away we can turn this thread to teaching your clown fish to pole dance of your favourit sps coral.. as long as its informative have at it. lol

i was thinking a closed loop style mixing station with the outputs pointed to the tank bottom drilled into the bottom of the tank to reduce cost of purchasing powerheads. float valve from rodi to keep constant water level between water changes. some sort of chamber to hold the salt to pre mix then dump into tank in hopes of reducing teh scum on bottom of the tank.

in the process of drawing out a plan off attack. will also need to drill a spout to dump premixed water into buckets to the two tanks.. with possability of pumping it from basement to the upstairs from under bathroom sink.

curse you finished basement and drywalled ceilings.

[Big Tang]

Both Edmonton fastners & Calgary fastners stock it.

[The Grizz]

Originally Posted by lockrookie

i was thinking a closed loop style mixing station with the outputs pointed to the tank bottom drilled into the bottom of the tank to reduce cost of purchasing powerheads. float valve from rodi to keep constant water level between water changes. some sort of chamber to hold the salt to pre mix then dump into tank in hopes of reducing teh scum on bottom of the tank.

in the process of drawing out a plan off attack. will also need to drill a spout to dump premixed water into buckets to the two tanks.. with possability of pumping it from basement to the upstairs from under bathroom sink.

curse you finished basement and drywalled ceilings.

Add some loc-line with fan nozzels to the closed loop then you can point them in any direction you want. I got a bunch of loc-line off e-bay REALLY cheap.

[lockrookie]

all is scraped off but i think some is embedded in the glass. for what its worth i appreciate all the ideas and help.

all in all i think i have decided the use for this tank im going to use it to mix salt water and i am going to build a closed loop for mixing. one thing ive noticed when mixing in a rubbermaid container it the sediment that builds on the bottom of the rubbermaid container which then flakes off and contaminates the fresh mixed water with white flakey particles. any ides how i would keep this from happening. ive thought about very high water presure shooting at the bottom of the tank but unsure if that would be enough. all i know its a bugger to clean when it builds up.

sorry to switch the feel of the thread i call it multiple thread personalty syndrom.