|
|
|
|
|
#2
01-15-2011, 01:35 AM
|
|||||
|
|||||
good luck and strong backs to ya!
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 
|
|
#3
01-19-2011, 01:39 AM
|
||||
|
||||
|
ok so heres how things ended up after the weekend!
first things first i should tell you i have an insanely worrisome landlord! so we started in the backyard!  Bruce was out to help us!  this is where the tank had to go! so we ended up taking out the railing to make life easier this is the space in front of the front door!  and unfortunately thats as far as we got! the tank is 1mm to big to fit through the door! i %&$# you not! 1mm! so we talked about taking the inner frame of the door off which has the weather stripping on it, not the outside frame and the landlord was having non of it!! so the next step is either leave the tank there until i move which would be easiest or get one of the bottom panes of glass off the tank, get the tank in the house, and then redo the bottom of the tank! now either way i have to get the eurobracing fixed so i might get the manufacturer to do all of the above! heres the state of the euro-bracing now     any thoughts on the euro-bracing? ive been told by jason that the mfctr of the tank has said regardless of euro-bracing the strength of the tank is uncompromised  so ya thoughts would be appreciated! Drew
|
|
#4
01-19-2011, 01:54 AM
|
||||
|
||||
|
Quote:
in case you feel nececerry, you could even laminate an entire length on top of the cracked, minr is fine with about 20 inches cant se the crack in the bracing, where is it. I had mine cracked as well right in the middel (2 years back), I went to get a strip of 12 mm glass (about 20 inches long and the with of the bracing, cleand the hel out of the bracing and silicone'd it on there, never a problem watch out when you work in the tank, when you hang over to put things in ore maintain, you always lean, no matter what, unless you have the tank on the floor. it is the leaning against it that cracks it (ore the belly hanging over it) what I would sugest is to make a 2x6 frame around the tank on its flat side, to avoid the presure on the edge
|
|
#6
01-19-2011, 02:09 AM
|
|||||
|
|||||
|
This is brutal. Why the heck was the landlord even there the day you tried to get it in? Does he live upstairs? I'd have just moved it down there, not told him of the clearance issue and just fixed the frame up later. Man this stinks.
|
|
#8
01-19-2011, 03:12 AM
|
||||
|
||||
|
he lives upstairs yes and we needed his help to get it down the stairs
lol its all on the same level now so i can always move it in and fix it later as well i just have to find a time when they are not around lol its really a must as i have lost 2 of my tangs in the past 24 hours due to the fact that they needed a bigger home!
|
Hybrid Mode
