|
|
|
|
|
#1
01-12-2011, 05:42 AM
|
||||
|
||||
depending what your situation is, it should be pouseble to move it with only 2
you only need help with the lift when I put my 350 in, I made a dolly where the tank was on, roled it to the stand and jacked the dolly one side at a time to the levvle of the stand I did this with my wife, and eventually we slided the tank from the dolly onto the stand with the 2 of us. as mentioned, it depends how you have it, but I se you still need to lift it onto something, I had mine put on the dolly with a fork lift and roled it in a trailer ohhh, we had to take the wall out so the dolly fit !! wish you all the best, when you dont se the light anymore, think how nice this one will be, I'm already thinking and gathering things for a 5.5 feet square Last edited by Chin_Lee; 01-14-2011 at 03:22 AM. Reason: mod removed "quote" of entire prev message 
|
|
#2
01-12-2011, 05:49 AM
|
||||
|
||||
|
haha if only it were that simple it has to go down 4 stairs and through 2 doorways then onto the stand
hence why i need help moving it lol for anyone interested im recruiting for help moving it in the next 48 hours because of the snow! if u live in the coquitlam port coquitlam area and like free pizza and beer and fishtanks! let me know, we could totally use the help!! Drew
|
|
#3
01-12-2011, 05:51 AM
|
|||||
|
|||||
|
It's too bad I'm not closer. Most people around here know I'm HUGE and could likely lift this thing alone. Best of luck Drew.
|
|
#4
01-12-2011, 06:18 AM
|
|||||
|
|||||
Quote:
|
|
#5
01-12-2011, 04:48 PM
|
|||||
|
|||||
|
I can help if you need it. LMK.
Derek
|
|
#8
01-12-2011, 07:22 PM
|
||||
|
||||
|
crack in bracing
cant se the crack in the bracing, where is it.
I had mine cracked as well right in the middel (2 years back), I went to get a strip of 12 mm glass (about 20 inches long and the with of the bracing, cleand the hel out of the bracing and silicone'd it on there, never a problem watch out when you work in the tank, when you hang over to put things in ore maintain, you always lean, no matter what, unless you have the tank on the floor. it is the leaning against it that cracks it (ore the belly hanging over it) what I would sugest is to make a 2x6 frame around the tank on its flat side, to avoid the presure on the edge
|
|
#9
01-12-2011, 11:35 PM
|
||||
|
||||
|
Quote:
thanks for the offer but its quite a drive for you from delta! we would love the help! and i'll make sure to have an extar beer waiting for you if you like!!
|
|
#10
01-13-2011, 10:22 PM
|
||||
|
||||
|
hey guys
so heres the details! we are doing it this saturday @ 12noon so if you are free and willing to help we sure could use it! there will be pizza and beer for everyone and of course the obvious tour and fish sightings! pm me if you're free and are up to coming out!! Drew thanks a mill!
|
Hybrid Mode
