![]() |
|
#1
|
|||||
|
|||||
![]() I wonder how often if at all the OP of the RC thread cleaned the pump.......I get it at work all the time...."my pump died"...."my vortech died".....you look at it and there is soooo much crud caked on it there is no wondering why it failed.....it doesnt take much build up to throw something that's spinning a million times per second out of balance.....
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#2
|
|||||
|
|||||
![]() Quote:
__________________
![]() Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk |
#3
|
|||||
|
|||||
![]() Quote:
![]() ![]()
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#4
|
||||
|
||||
![]() I have to say a mesh mod laguna - askol is not that bad, it is in fact working super for me, and in case it fails, I can buy several new once for the price of a new RD pump
I have my mesh mod running now, and found out that as I have a1/2 inch air feed when trimming it a bit with a valve, I get even more air, way, way more. I now have the skimmer outlet 10 inches lower than the skimmer nek (before I had the water in the skimmer at the neck level) meaning if you really are pump down on your BBK, it is something to consider (where I also have to agree that for a skimmer with this price tag, it should not have to be) se link below for my mesh mod http://www.canreef.com/vbulletin/showthread.php?t=70820 |
#5
|
|||||
|
|||||
![]() I just wanted to post an update to this. It was actually a friend of mine (whom I had set up his tank) who had the issue with the skimmer. He called and spoke to Proline and received exceptional service in dealing with the problem.
Hats off to Proline stepping up to the plate on this issue. Thank you
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up. |
#6
|
||||
|
||||
![]() There must be 2 different Proline's I'm thinking. The Proline company I am presently dealing with don't return calls and lie. Never again will I buy any product that Proline sells!
|
#7
|
|||||
|
|||||
![]() If you're talking about Proline Aquatics in BC you'll have a hard time avoiding their products, they are the main Canadian distributor for the stuff we use. If you use good salt, it likely comes from them. They've always been good to deal with in my experience and I haven't heard of any problems but they are a distributor so you might have better luck working through your retailer.
|