Dinoflagellates - How to Raise PH

[daniella3d]

I think that because my alkalinity was around 6.5 to 7, it did not take much to raise my PH in my 75 gallons as I only used one cap per day and it was enough for me, for 4 days.

I really had no trouble keeping it at 8.4 and it was stable with that stuff. Maybe your alkalinity is too high and you have too much buffer to make your PH bulge for long? just guessing here.

Originally Posted by Tyler Werbowski

So I tried the Aquavitro Balance. It does raise the PH but is not very economical as I went through a $13 bottle in a day.

160G total water
My dKH is now at 9.6.
CA = 420
MG = 1400

Before work my PH was 8.1. So I bumped it up with 100 ml of baked baking soda (aka Rndy's 2 part) and 4 cups of limewater (dissolved kalk) to get it to 8.5 before going to work. Came home after work and it was back down at 8.1. This is turning into a full time job. I really don't wanna be driving home on my lunch hour.

Will a kalk drip work to keep it at 8.5 overnight and during the workday?

This is the first time I have played with raising PH and trying to keep it at a consistent 8.5 for a week straight.
Any input would be appreciated.

Thanks

[Werbo]

I think it is the opposite. The higher your dKH the easier it is to keep your PH on the high side.

Anybody know for sure?