![]() |
|
#1
|
||||
|
||||
![]() Brad - I put grey, poly-style underlay in my sump under my return pump. 2 years and is not showing any signs of breaking down. Got it from Home Depot.
|
#2
|
|||||
|
|||||
![]() A clean tea towel folded over a few times and placed under will work good for now until you can find something more permanent
__________________
![]() |
#3
|
|||||
|
|||||
![]() I just put a piece of fairly thin styrofoam under mine. I think it was previously a styro fish box lid
![]()
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#4
|
|||||
|
|||||
![]() Mouse pad
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#5
|
||||
|
||||
![]() Right, +1
I have seen mouse pads made of wetsuit material. neoprene |
#6
|
|||||
|
|||||
![]() I cut up the sponge from a mag drive pump put it under works great
__________________
Murray I reserve the right to hijack any thread I want to!! My carbon footprint is bigger than your carbon footprint !!!! |
#7
|
|||||
|
|||||
![]() I used a piece of filtration foam and used plastic ties
Also you could use foam, the same stuff you use between your tanks and stand.
__________________
![]() Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk |