led lighting?

[Milad]

dimensions of tank? and what color you look for? 14kish?

[monocus]

depends on the coral-some of the frags i have have bleached and some are growing-par is between 200-300 with the vortex illumina

[Ryan Joel Smith]

I'm sorry, the lady im buying from did not know the dimensions as she is selling the tank for her sister. I do know it is 5ft long. My problem is this: whenever i read about led's i feel like i need a "led dictionary" as i have no idea what the terms being used mean. I found a few setups on ebay ie. http://cgi.ebay.com/300w-LED-Aquariu...ht_4063wt_1141 would this be enough??? or should i buy more. Sorry for being so un-educated on the issue.

Thanks for any help

[Milad]

well that wouldnt be enough for a 5foot tank
plus i wouldnt buy those types of fixtures if I were you.

you can build your own which is what im doing and im doing a group buy right now
Group buy: http://www.canreef.com/vbulletin/showthread.php?t=70376
Build Thread with parts: http://www.canreef.com/vbulletin/showthread.php?t=70413


4 a 5 foot 125g which probably is around 22 tall 22 wide

if you look at the some of the 3w cree leds in that group buy and you are looking for a 14kish colors

you would need about 72 royal blue and 48 cool white with 40degree optics at about 11inches from water
and you can tune from there adjusting the amps to get the right color and brightness as long as you have them on dimmable drivers for each color

if you want an LED fixture I would go with either the vertex like monocus has or http://www.aquaillumination.com/

or hire me to build it!

[Milad]

btw im partial to the CREE leds thats why im saying i dont like the ebay link and no one has tried them out or tested. big difference between one LED to the next.

[Ryan Joel Smith]

How much>? lol name the price and i will have to evaluate.

[Ryan Joel Smith]

Originally Posted by Ryan Joel Smith

How much>? lol name the price and i will have to evaluate.

Milad "or hire me to build it!"

[mseepman]

If you are unsure about building your own (or hiring someone to build it) then you might want to take a look at one or two of these with CREE lights in them.

https://www.fish-street.com/key_aqua...ategory_id=118

I am planning to build my own too and if you have the budget, Milad appears to be the right track for making a great light so he might be the right person to do it for you.

[roblarss]

Well I did mine about 2 years ago and have had an expensive learning curve.

With the knowledge out there now that can be reduced significantly. I paid about 4 bucks an led and the drivers - meanwell CLG-150-24A - were about 250 dollars for both. I made my own custom heatsink since I couldn't find one in canada and heatsinkusa was to much for shipping - i was trying to be a cheap bugger.
Within months of running one test panel - around 60 LEds i had the entire panel failed due to heat - lost most of the leds. Redesigned the heatsink with fans and now have not lost a single LED in almost 2 years.

The failure was the result of not having a splash shield - acrylic plate - between the water and the LEDs and not having any fans running.

Now I swear by LEDs. Cost me a bit more than a Metal halide setup but I have zero heat issues in the tank and only 300 watts power consumption - probably less with the drivers running only 75%.

[eli@fijireefrock.com]

these are not good for reef systems as i have cheeked on them in the past.
1W led not high enough output. you need 3w led.
they have no optics,at 90 degree angle nothing much is reaching your corals in the tank.