![]() |
|
#1
|
|||||
|
|||||
![]() This clam (lower one) does not look to happy I would keep an eye on it.
I lost one that looked the same sometimes they just go and die just like that. Just my 2 cents I could be wrong..... The rest looks great though wish I had room for a eight foot tank.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#2
|
|||||
|
|||||
![]() He is a new transplant, pic was taken only a few hours after being in the tank and then my retard of a orange spot goby decided it was a rock and preceded to try and move all the sand out from under it.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
#3
|
|||||
|
|||||
![]() oh that makes sense then it is just spooked just looked kind of funny in the picture.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#4
|
|||||
|
|||||
![]() I finally broke down and re did the rock work over the last 2 days. Added loc-line to the returns from the closed loop, so now each return has 3 return ports and I must say I really like the flow now.
Bought a very gently used Snapper return pump for the main return. Going to take out the 1200 gph pump and put this in it place. Also pick-up a NextReef MR1 reactor for NP Pellets but don't have enough pellets left in my TLF 150 to put in service just yet. Next items on the agenda is a controller and some new lights. For the controller I am either going with a GHL Proflux 2ex that Ken @ BWA has or the ReefKeeper Elite. I must do a little research on the Proflux first. As for the light I am almost certain I am going to go back to MH with 2 - 48" fixtures, each fixture has 2 - 250w MH 15,000K bulbs, 2 - 54w T5 that I will put in either some KZ Coral Lite or UVL Actinic White bulbs. the fixtures also have 3 dual moon lights each. Once I have the light's I will have to finish the canopy of the tank as my wife wants me to put a shelf above the tank just below the picture that is hanging on the wall. So here is a FTS as of today not TOTM worth but doing my best, picture quality is crappy because I had to use my iPhone, wife's camera in the shop and I suck a photography. ![]() ![]() ![]() ![]() Enjoy and I hope to get more done over the holidays and update again
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
#5
|
||||
|
||||
![]() hey greg if you ever decide to go with some more power for halides i have 4 400w pendants/ballast/reflectors for sale
![]()
__________________
........ |
#6
|
|||||
|
|||||
![]() Thanks Denny but I think the 2 - 250w MH will be more then enough for my depth of tank.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
#7
|
|||||
|
|||||
![]() Looks great, I particularly like the end shot looking down the length of the tank.
![]()
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |