Lance's 225 gal tank

fishytime · #1 11-13-2010, 02:45 PM

Quote:

Originally Posted by Lance

I got myself a Tank-bred Yellow Assessor from J&L today. He's chillin' in the frag tank right now and hiding under some rock so I can't get a pic.
I don't think I should put him in the big tank (too many big lunkers in there), so his new home will be the 90 corner tank. Cute little guy!

those are great little fish Lance.....I love mine......always out and hovering (not like the blue assessor I have in my small tank......I never see it when the lights are on, even though its the only fish in the tank).....and so far my yellow doesnt seem to be too aggressive.....mind you the only fish mine could bully is a tailspot that is the same-ish size but was in the tank before the assessor....

Lance · #2 11-13-2010, 03:50 PM

Quote:

Originally Posted by fishytime

those are great little fish Lance.....I love mine......always out and hovering (not like the blue assessor I have in my small tank......I never see it when the lights are on, even though its the only fish in the tank).....and so far my yellow doesnt seem to be too aggressive.....mind you the only fish mine could bully is a tailspot that is the same-ish size but was in the tank before the assessor....

It should do fine in the 90g. His tank mates are a Coral Beauty, smallish Foxface, Ruby Headed Wrasse, 2 Percs, PJ Cardinal, Yellow Watchman Goby, and two cleaner shrimp.

Lance · #3 11-13-2010, 05:27 PM

I have a Sedra pump powering two reactors in the sump, which is kind of silly since I have a Barracuda return pump that is only using about 70% capacity. I want to "T" off one of the return lines to feed the reactors.
My question is: How long should I allow the Weld-On P-70 primer and PVC 795 to dry before going back on-line? The can says 30 minutes cure time, but I don't trust that to a tank full of fish and corals. Anybody had any experience using Weld-On on a running tank? 24 hours or less/more?

burrows14 · #4 11-13-2010, 06:19 PM

You would be good to go in 15 mins. I have used both plumbing a bunch of friends tanks. I always use the prime the fittings and let it dry completly before glueing. Be genourous with the glue and make sure to give the pipe a quater turn to make sure their is no air bubbles and the glue is spread evenly and then use paper towel to wipe off the excess glue. You should have no leaks and a nice clean look that way.

Cheers
Ray

Quote:

Originally Posted by Lance

I have a Sedra pump powering two reactors in the sump, which is kind of silly since I have a Barracuda return pump that is only using about 70% capacity. I want to "T" off one of the return lines to feed the reactors.
My question is: How long should I allow the Weld-On P-70 primer and PVC 795 to dry before going back on-line? The can says 30 minutes cure time, but I don't trust that to a tank full of fish and corals. Anybody had any experience using Weld-On on a running tank? 24 hours or less/more?

Lance · #5 11-13-2010, 06:42 PM

Quote:

Originally Posted by burrows14

You would be good to go in 15 mins. I have used both plumbing a bunch of friends tanks. I always use the prime the fittings and let it dry completly before glueing. Be genourous with the glue and make sure to give the pipe a quater turn to make sure their is no air bubbles and the glue is spread evenly and then use paper towel to wipe off the excess glue. You should have no leaks and a nice clean look that way.

Cheers
Ray

Thanks Ray. I wanna make sure I'm understanding you. I've used Weld-On plenty of times. It's not the cure time of the glue or the procedure I'm worried about, it's the effect of the glue on a tank full of animals that worries me. Am I understanding that after 15 minutes of curing there was no problem on an inhabited tank?

Zoaelite · #6 11-13-2010, 06:45 PM

WOW those fish can produce a whack load of eggs, ever find any little babies swimmin about? Tanks lookin wicked as usual!

Lance · #7 11-13-2010, 06:52 PM

Quote:

Originally Posted by zoaElite

WOW those fish can produce a whack load of eggs, ever find any little babies swimmin about? Tanks lookin wicked as usual!

Thanks. Nope, I've never seen any babies. They probably hatch out at night and are skimmed off.

muck · #8 11-13-2010, 08:06 PM

Quote:

Originally Posted by zoaElite

WOW those fish can produce a whack load of eggs, ever find any little babies swimmin about? Tanks lookin wicked as usual!

No doubt... unbelievable the amount of eggies.
Thanks for the pics Lance.

burrows14 · #9 11-13-2010, 09:15 PM

Quote:

Originally Posted by Lance

Thanks Ray. I wanna make sure I'm understanding you. I've used Weld-On plenty of times. It's not the cure time of the glue or the procedure I'm worried about, it's the effect of the glue on a tank full of animals that worries me. Am I understanding that after 15 minutes of curing there was no problem on an inhabited tank?

I have glued my last fitting, double checked everything and fired up with no harm to fish and corals. I wouldn't worry about it all.. The tank volume would dilute it and I'm sure your running carbon. If you drop the whole can in tho... Totally different story lol

Lance · #10 11-13-2010, 09:30 PM

Quote:

Originally Posted by burrows14

I have glued my last fitting, double checked everything and fired up with no harm to fish and corals. I wouldn't worry about it all.. The tank volume would dilute it and I'm sure your running carbon. If you drop the whole can in tho... Totally different story lol

OK, I'm feeling better about it. And I won't drop the can in the tank.