turnning pumps off and on

[Skimmerking]

why not just have a dump system going and its always going

I have a Dart running my closed loop. It only cycles once a day (on in morning, off at night), but has done that for 4 years without the slightest complaint...

[lastlight]

I know you can buy some sort of electrically controlled valves. Maybe they are actuated I'm not sure. They are pretty spendy for a quality one but maybe a valve that alternates between one return line and another is the answer. Keep the pump on?

[Delphinus]

I looked into this myself a few years ago or particularly using a MOV or two to switch direction every few hours or minutes but the pump stays on. Then basically the Ocean Motions came out with the same idea although I don't know if the speed is easily controlled.

Switching pumps would work also except you need two. On and off on a closed loop is not so bad in and of itself if you're looking at a few hours per cycle but I would think it's still harder on the pump long term than just leaving it on.

You're basically talking about doing a gyre flow, it's a good idea in principle and there seem to be a few ways to achieve a good result. Coordinated powerheads on a controllable wavemaker can work towards this as well.

[lastlight]

If you wanna get super fancy what about a fancy pair of red dragon's with vfd? Have one ramp to basically nothing while the other ramps to 100%? Have them opposite each other.

Turning on and off a pump is the cheaper option even IF you fry your pump lol!

[steve fedyk]

the red drogon pumps sounds like a good idea, because at night I can slow down the flow for the fish to sleep.

[mark]

RC thread for mod'ing pumps for variable flow, but wouldn't worry about slowing the flow for sleep time.