|
|
|
|
|
#1
10-31-2010, 06:57 PM
|
||||
|
||||
most places you can order the steel cut. That's how we get most of are stuff in. The rest we cut on the water jet or burning table. 3/8 plate would be strong enough in most cases.
What do you need it for? probley coast about $150 for cutting and the material.
__________________
120 G sps reef, looking to build bigger. 
Last edited by steve fedyk; 10-31-2010 at 07:00 PM. 
|
|
#2
10-31-2010, 07:00 PM
|
||||
|
||||
|
Quote:
im going to be using it as a light ring for my 4x4 tank it will have 4 pendants bolted on ti it and the ring will be suspended by wires from trusses in my ceiling, it doesnt have to be flat steel also i should mention or a full circle for that matter either maybe square tubing in the shape of a stop sign. i could easily make it from plywood plys but id like it to last long and not lose shape and most importantly id like it to be clean looking  thanks all
__________________
........
|
|
#4
10-31-2010, 07:22 PM
|
|||||
|
|||||
|
If that is all it is going to support then a 1/4' plate would do just fine and could be cut very easily. I can get a price on the steel tomorrow and let you know. It would only take me about a 1/2 hr to cut it and clean. You want it to be a 3' circle but how wide of a band do you want.? Just a guess here but it could be done for around $75.
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build
|
|
#6
10-31-2010, 07:32 PM
|
|||||
|
|||||
|
add a disco ball in the middle of the ring then you will have tank chandalier
__________________
Desperately seeking serenity ... 180g custom build http://www.canreef.com/vbulletin/showthread.php?t=81400 50g custom daycare tank... http://www.canreef.com/vbulletin/showthread.php?t=65428
|
|
#7
10-31-2010, 07:38 PM
|
||||
|
||||
|
Quote:
hahah not a bad idea lol disco over the tank im thinking 3 inches so i can add some moonlights comforably any thoughts?? the ring like grizz said wont actually be holding any weight just the pendants and wiring and id like to think ahead and make it strong enough to hold strip lights on as well down the road
__________________
........
|
|
#8
10-31-2010, 07:43 PM
|
||||
|
||||
|
Quote:
maybe a cross brace on the back tacked on so it keeps its shape over time???out of flat bar or something??
__________________
........
|
|
#9
10-31-2010, 07:46 PM
|
||||
|
||||
|
Quote:
just thinking out loud here but better yet if i do a cross brace on the back out of square tubing that could hide all my wires eh??? would be clean no??
__________________
........
|
|
#10
10-31-2010, 07:55 PM
|
||||
|
||||
|
A lazer cutting shop will be the best bet http://www.google.com/search?q=laser...ed=0CCkQtQMwAA
, as for the size I would not go over 1/4" as it will just be overkill personly 3/16" would do it for me also if you get it lazer cut it wont twist or bow out of flat, your only going to be supporting a few kilo at max right?
|
Hybrid Mode
